Behringer FCV100 technical specifications Specifications

FOOT CONTROLLER FCV100

SPECIFICATIONS

Input/output	1/4" TS connectors, unbalanced
	Tip: Supply voltage from unit/instrument
	to be controlled (Impedance: 50 kΩ)
	Ring: Slider pick-up (control voltage
	dependend on pedal position
	(Impedance: 0...50 kΩ)
Maximum input level	2 V (RMS)
Input impedance	300 kΩ
Output impedance	560 Ω
Attenuation range	0 - 70 dB
Total harmonic distortion	0.04% (1 kHz @ 1 V (RMS) output)
Signal-to-noise ratio	94 dB
Power supply	12 V / >10 mA DC power adapter
Battery power	9 V battery type 6LR91
Power consumption	7 mA
Dimensions	6" (150 mm) x 5" (130 mm) x 2 3/8" (60 mm)
Weight	approx. 650 g (1.43 lbs)

The information contained in this publication is subject to change without notice. No part of this

publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.

BEHRINGER is a registered trademark. ALL RIGHTS RESERVED.

©2003 BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,

47877 Willich-Münchheide II, Germany

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

3