Patch BAY, Preamp Output Monitor | Kustom KPM8420 guide

PATCH BAY

CD/Tape

Left Right

Phantom

Power

Playback			Subwoofer Output
Left	Right	Off
		Off
Record Output			Light Control Output
Preamp		Power Amp	Power Amp
Output		Assignment	Input
		Main
	Main	Monitor	A
	Main		A
		Main
Monitor		Monitor	B
Monitor			B

45 46

CD / TAPE PLAYBACK Jacks:

These RCA jacks are used to play audio from CD, Tape, Computer, DVD, Hard Disc, MP-3 or other line level audio source. NOTE: Use the PLAYBACK controls (#20 & #24) to adjust the volume of the playback to the Main and Monitor sections.

CD / TAPE RECORD OUTPUT Jacks:

These RCA jacks deliver a MONO Line level output to a recording device such as Tape Recorder, Computer, Recordable DVD, Hard Disc, MP-3 and more.

PHANTOM ON/OFF Switch:

This switch turns on the 40V phantom power to the XLR input Jacks. This power supply is designed to provide power for condenser microphones and other devices.

PREAMP OUTPUT MONITOR:

This ¼” Mono jack delivers a line level output from the MONITOR Master section.

POWER AMP ASSIGN A Switch:

This switch determines which master section will drive the A power-amp. Place the switch in the UP position to have the MAIN mix signal to the A power-amplifier. Place the switch in the down position to have the MONITOR mix signal to the A power-amplifier.

POWER AMP ASSIGN B Switch:

This switch determines which master section will drive the B power-amp. Place the switch in the UP position to have the MAIN mix signal to the B power-amplifier. Place the switch in the down position to have the MONITOR mix signal to the B power-amplifier.

SUB WOOFER OUTPUT Jack:

This is a low pass sub woofer output. Crossover point = 150 hz @ 12db/oct.

LIGHT CONTROLLER OUTPUT Jack:

This is selective band-pass output designed to deliver a Line level audio trigger signal to Lighting Controller devices.

PREAMP OUTPUT MAIN:

This ¼” Mono jack delivers a Line level output from the MAIN Master section.

POWER AMP INPUT A:

This ¼” Mono jack allows the A power-amplifiers to be used with an external Line level input. NOTE: When used, this jack will interrupt the signal flow from the mixer section of the KPM8420.

POWER AMP INPUT B:

This ¼” Mono jack allows the B power-amplifiers to be used with an external Line level input. NOTE: When used, this jack will interrupt the signal flow from the mixer section of the KPM8420.