Pioneer VSX-84TXSI, VSX-82TXS-S, VSX-84TXSi-S Plugging in the receiver, AC outlet, FM wire antenna

Page 20

03Connecting your equipment

FM wire antenna

•Connect the FM wire antenna to the FM UNBAL 75 Ω in the same way as the AM antenna.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω.

75 Ω coaxial cable

ANTENNA

FM UNBAL 75 Ω

AM LOOP

To improve AM reception, connect a 15 ft. to 18 ft. length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Plugging in the receiver

Only plug in after you have connected all your components to this receiver, including the speakers.

•Plug the AC power cord into a convenient AC power outlet.

Caution

•Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a replacement.

•The receiver should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation.

•Make sure the blue STANDBY/ON light has gone out before unplugging.

ANTENNA

FM UNBAL 75 Ω

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

15 ft. to 18 ft.

AM LOOP

AC outlet

Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).

Caution

•Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet.

•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.

•Since a subwoofer or power amplifier can exceed the 100 W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.

20

En

Page 19 Page 21
Image 20
Page 19 Page 21
Contents VSX-82TXS VSX-82TXS-S Federal Communications Declaration of Conformity AddressPhone Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Other Settings Using other functionsControlling the rest of your system Additional informationBefore you start Automatically setting up for surround sound Mcacc Minute guideMinute guide Chapter Introduction to home theaterMcacc 02 5 minute guideYES Better sound using Phase Control Problems when using the Auto Mcacc SetupMinute guide Playing a sourceRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections DVD player Connecting your equipment Connecting your TV and DVD player324 Or other set-top box Other video sources Use an optical cable for the connectionUse a three-way component video cable Using the component video jacksFor a second recorder, use the DVR/VCR2 outputs Connecting your equipment Connecting digital audio sources About the WMA9 Pro decoderConnecting your equipment Connecting analog audio sources Connecting a component to the front panel inputsTape deck, etc SpeakersConnecting your equipment Installing your speaker system Connecting the speakersSubwoofer Front Left Right Surround Left Right Back left Back rightBanana plug connections Bare wire connectionsPlacing the speakers Connecting antennas THX speaker system setupAM loop antenna Assemble the stand as shown in the illustrationFM wire antenna Connecting external antennasPlug the AC power cord into a convenient AC power outlet Plugging in the receiverControls and displays Controls and displays ChapterFront panel STANDBY/ONOperating range of remote control unit Controls and displaysControls and displays Display Controls and displays Remote control ReceiverInput Select 6TUNE/ST /ENTERStatus MultiopeShift SourceControls and displays Sub remote control unit Listening to your system Listening to your system ChapterListening in surround sound Auto playbackUsing the Home THX modes Using the Advanced surround effectsTHX Games Mode Listening to your systemUsing Stream Direct Selecting Mcacc presetsListening in stereo TipListening to your system Choosing the input signal Using the Virtual Surround Back modeUsing the Sound Retriever VirtualSB OFF Virtual Surround Back mode is switched offUsing the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Select the setting you want to adjustSystem Setup menu MemorySurround back speaker setting Make sure ‘OK’ is selected, then press EnterManual Mcacc setup Fine Channel LevelWhen youre finished, press Return Fine Speaker DistanceStanding Wave 10dB as necessarySelect ‘Standing Wave’ from the Manual Mcacc setup menu Select ‘EQ Adjust’ from the Manual Mcacc setup menuSelect the channels you want and adjust to your liking Acoustic Calibration EQHow to use Professional Acoustic Calibration EQ How to interpret the graphical outputUsing Professional Acoustic Calibration EQ Select ‘EQ Professional’ then press EnterSelect an option and press Enter EQ OFFChecking Mcacc preset data System Setup menu Data ManagementCopying Mcacc preset data Manual speaker setup Speaker SettingRenaming Mcacc presets Clearing Mcacc presetsSelect ‘Channel Level’ from the Manual SP Setup menu Select a setup optionConfirm your selected setup option Adjust the level of each channel using the buttonsEnter Speaker DistanceBass Peak Level THX Audio Setting CurveConnecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterUsing XM Radio Watching photos and video contentConnecting your XM Radio receiver Other connectionsUsing XM HD Surround Saving channel presetsListening to XM Radio Selecting channels and browsing by genreListening to channel presets Connecting using HdmiUsing the XM Menu Using the i.LINK interface About HdmiAbout i.LINK Checking the i.LINK inputsAbout Pqls rate control Creating an i.LINK networkOther connections Connecting the multichannel analog inputs Using the USB interfaceSelecting the multichannel analog inputs Use standard RCA/phono jack cables for the connectionsSecond Zone speaker B setup Switching the speaker systemUse the Input Select button to select USB Start playback of a source on your computerConnect your speakers as shown below Bi-wiring your speakersBi-amping your front speakers Multi-room listening Making multi-room connectionsBasic multi-room setup Room Surround Back System multi-room setup RoomSecondary multi-room setup Room Multi-room listening optionsConnecting an IR receiver Using the multi-room controlsMulti-room remote controls InputSwitching components on and off using the 12 volt trigger Using this receiver with a Pioneer plasma displaySAT Using the SR+ mode with a Pioneer plasma displayDVD player Personal computer Other connections Connecting a PC for Advanced Mcacc outputAdvanced Mcacc output using your PC Input Setup menu Other SettingsOther Settings Chapter Other Settings Other Setup menuInput function default and possible settings Select ‘Other Setup’ then press EnterOSD Adjustment Multi-Room SetupSR+ Setup for Pioneer plasma displays Using other functions Using other functions ChapterSetting the AV options Setting What it does OptionsMaking an audio or a video recording Using other functionsPlaying a different source when recording Reducing the level of an analog signal Using the sleep timerSwitching the speaker impedance Dimming the displayUsing other functions Checking your system settings Resetting the systemDefault system settings Setting Default2PL II Music Options Center Width Dimension Panorama Neo6 Options Center Image All Inputs Listening Mode 2 chListening Mode x ch Listening Mode HPSetting the remote to control other components Selecting preset codes directlyRemote controls Controlling the rest of your systemErasing one of the remote control button settings Resetting the remote control presetsConfirming preset codes Controlling the rest of your systemRenaming input source names Direct functionMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing multi operations Using System offControlling the rest of your system Controls for TVs Controls for other componentsButtons Function Components Function ComponentsDecide which component you want to use the remote sensor Operating other Pioneer components with this unit’s sensorButton s Function Components Troubleshooting PowerAdditional information Additional information ChapterOther audio problems Additional informationVideo Professional Calibration EQ graphical output SettingsDisplay Remote control Link interfaceMessage Explanation Link messagesUSB interface XM radio messages Symptom Cause ActionIPod messages Windows Media Audio 9 Professional Additional information Surround sound formatsDolby About THX Listening modes with different input signal formats Stereo 2 channel signal formatsTHX Games Mode THX MusicModeMultichannel signal formats Input signal format StandardAuto Surround Unavailable with only one surround back speaker connectedInput signal format Surround Back speakersAdditional information Specifications Cleaning the unitFeatures Additional information Our philosophyWe Want You Listening For a Lifetime To establish a safe levelPioneer Corporation XRB3066-A

VSX-84TXSi-S, VSX-82TXS, VSX-82TXS-S, VSX-84TXSI specifications

The Pioneer VSX-84TXSi, VSX-82TXS, VSX-84TXSi-S, and VSX-82TXS are part of Pioneer's renowned lineup of home theater receivers, notable for their impressive audio capabilities and advanced features. Designed for enthusiasts who appreciate high-quality sound, these receivers stand out in the crowded market of A/V receivers.

The VSX-84TXSi and VSX-84TXSi-S come equipped with a robust 7.1-channel amplifier configuration, delivering a powerful output that ensures dynamic and immersive audio experience. Both models boast Pioneer's sophisticated Class D3 amplification technology, which efficiently provides high power output while minimizing distortion and heat. This feature allows listeners to enjoy their favorite music and movies with clarity and depth.

One standout feature of these receivers is the Advanced MCACC (Multi-Channel Acoustic Calibration System) technology. This automatically adjusts the speaker settings to fit the unique acoustics of the room, ensuring balanced sound across all channels. The calibration process is user-friendly, allowing even novice users to achieve optimal sound performance.

In terms of connectivity, the VSX-84TXSi and VSX-82TXS are equipped with multiple HDMI inputs, supporting the latest audio and video formats, including 4K Ultra HD. They also support Dolby TrueHD and DTS-HD Master Audio, which deliver lossless audio quality for a truly cinematic experience at home.

The VSX-84TXSi and VSX-82TXS models feature a user-friendly interface that includes on-screen displays and intuitive controls. They also offer extensive compatibility with various formats, including MP3, WMA, and AAC. For those who want to stream their music, both models have built-in support for networking capabilities, allowing users to connect to their home network and stream content from devices seamlessly.

The VSX-82TXS, while slightly less powerful than the VSX-84TXSi, offers many features that appeal to casual users and audiophiles alike. It retains the same high-quality audio processing and supports a variety of surround sound formats, making it a versatile choice for different media types.

Overall, the Pioneer VSX-84TXSi, VSX-82TXS, VSX-84TXSi-S, and VSX-82TXS are excellent choices for anyone looking to enhance their home entertainment experience. With a blend of advanced technology, impressive audio performance, and user-friendly features, these receivers continue to be favored options for home theater setups.
Top Page Image Contents