11.TRANSPOSE
This function allows you to shift the pitch of the unit in semitones. You can transpose the pitch by 24 half steps (12 up, 12 down).
Press the TRANSPOSE switch. The LED shows the current TRANSPOSE value.
Press the “+” or
*Pressing the + and - switches simultaneously resets the pitch to the default value. Note: Turning the power off always resets the shifted pitch to the default value.
12.OCTAVE CHANGE
This function allows you to shift the pitch up to three octaves higher or two lower.
Press the OCTAVE UP or DOWN to change the octave range. The LED shows the new OCTAVE value.
* Press OCTAVE UP and DOWN switches simultaneously to reset the pitch to the default value.
Note: if the UP or DOWN switch is not pressed for 3 seconds, the LED will return to show the PROGRAM CHANGE number.
13.Sending BANK MSB and LSB message
You can send any value of MSB or LSB from
Press the BANK LSB switch. The LED starts to flash showing the current value of the LSB. Press the numeric keys to change the LSB value. You can also use the “+” or
Press the BANK MSB switch. The LED starts to flash showing the current value of the MSB. Press numeric keys to change the MSB value. You can also use the “+” or
Note: * if you don’t do anything for 3 seconds the LED stops flashing and shows the current PROGRAM CHANGE number.
* if the number you input is over 127, it will return to the previous LSB or MSB value.