Overview
3 Overview
The
The
Four rear panel XLR input connectors and two XLR output connectors
A front panel headphone output, positioned alongside a phones level potentiometer
Two master front panel potentiometers for adjusting each of the master outputs of all1 channels
Four front panel level potentiometers3 for adjusting each input
A 12 VDC rear panel power socket, which is ideal for field use2. The unit generates broadcast voltage level ±15V and ±48V internally from the single 12 VDC input
Underside panel switches3 for selecting the balanced level (Mic or line)
Underside panel switches3 for applying 48V phantom power4
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may adversely influence signal quality and positioning your
Caution – No
Warning – Use only the Kramer Electronics input power wall adapter that is provided with this unit5.
Warning – Disconnect power and unplug unit from wall before installing or removing device or servicing unit.
1 The combined signals from inputs 1 to 4 are mixed 2 Via a belt battery, for example
3 Each corresponds to its respective input
4 This is for applications that require typical condenser microphones to be connected directly to the
5 For example: model number AD2512C, part number
3