Rear Panel

DIRECT OUTPUT – An XLR balanced direct output is provided for connection to a PA system or directly into a recording studio console or A/D converter. The Direct Out signal may be switched between mic and line level, pre and post EQ, and the audio signal ground may be connected or lifted from pin 1 to eliminate hum due to ground loops. This output is fully protected against 48 volt phantom power and may be used for driving microphone lines of up to 300 feet without problems.

TUNER OUTPUT – The SHUTTLE®9.2 is equipped with a fully isolated Tuner Output. This jack is located after the front end scaling preamplifier, but is pre-signal shape and pre-EQ. This output may also be used to drive a separate direct box or high-impedance recording device. The Tuner Output remains active when the amplifier is muted, allowing silent tuning on stage.

AUX INPUT – A 1/4” unbalanced line level Auxiliary Input is provided that sums directly to the main output bus, controlled by the master volume control. This input is ideal for practicing with recorded tracks from a CD player, iPOD, or MP-3 player. This input is a tip-ring-sleeve type jack with built-in summing resistors that sum left and right signals when used with a stereo cable. This input will also work with a mono tip-sleeve plug. Adjust the level of the playback source to balance with the bass guitar’s volume.

EFFECTS LOOP – A rear panel effects loop (SEND and RECEIVE jacks) is provided for connecting “serial” outboard devices such as compressors and may also be used for parallel type outboard devices (delays, reverbs, harmonizers, octavers etc.) by using the mix control located on the outboard device. This loop is located right before the Master Volume control and is also intended as a Preamp Out / Power Amp In connection for possible “chaining” of amplifiers in a Master / Slave configuration. The effects “loop” contains a “normal switch” in the receive jack that interrupts the signal path when a plug is inserted into the receive jack. The send jack may be used for an aux. output without breaking the signal path.

HEADPHONE OUT – A 1/4” TRS jack is provided for connection to headphones for silent practice use. A speaker load is not required. Do not connect this output to anything but headphones.

FOOT SWITCH – This connector is for connecting the optional 4 button foot switch to the SHUTTLE®9.2. Do not use anything but the factory supplied foot switch. Model# F/S-STL.

POWER AMPLIFIER – The SHUTTLE®9.2 uses a state of the art, Class D power amplifier design and a high frequency switch-mode power supply (SMPS) to achieve unprecedented high performance and lightweight packaging. Switch- mode power supplies convert the AC line directly to high voltage DC, then the precision PWM (pulse width modulation) inverter creates a new AC power signal at a frequency more than 1000 times higher than the original wall frequency of 50/60Hz. This new high voltage, high frequency power signal is then fed into a custom high frequency transformer that steps the voltage down. A high frequency rectifier and high ESR filter capacitors finish the process off by converting the high frequency AC signal back to the DC voltages that the amplifier’s internal circuitry uses. One advantage of this conversion process is that the DC power supply rails are refreshed more than 1000 times more often than in traditional linear supplies, thus reducing annoying hum in the audio signal. The high frequency switching is used to reduce the size and weight of the magnetic and filter components while increasing the performance by recharging the power supply rails more often. The Class D amplifier uses digital PWM techniques similar to those in more familiar digital to analog converters to reduce the size and weight by a factor of 10 times that of a comparably rated conventional class AB amplifier. Essentially, a Class D amplifier converts the analog signal into a logic level PWM digital signal with an analog to digital converter, level shifts this PWM signal up to a higher voltage and current and then reconstructs the analog signal by passing it through what is essentially a power digital to analog converter. Additionally, we developed our own proprietary 3DPM™ technology to give a distinctly analog feel and sound to the Class D platform. This system provides exceptional performance even for low frequency applications such as bass guitar.

9.2 specifications

The Genz-Benz 9.2 is a standout piece of equipment in the world of professional audio amplification, highly regarded for its performance, reliability, and advanced features. This powerful amplifier is part of Genz-Benz's renowned line of products designed to cater to the needs of musicians, particularly bass players seeking an exceptional sound.

One of the most notable features of the Genz-Benz 9.2 is its impressive power output. With a substantial wattage rating, it can easily drive various speaker configurations, delivering ample headroom for live performances and studio applications alike. The amp's lightweight design, incorporating advanced materials, makes it highly portable without sacrificing performance.

A key characteristic of the Genz-Benz 9.2 is its state-of-the-art Class D amplification technology. This technology ensures high efficiency, reducing heat generation and allowing for a compact design while still producing a rich, warm tone. The amp’s Class D architecture translates to a cleaner amplification path, resulting in better sound fidelity across the frequency spectrum.

The 9.2 features an intuitive control panel, allowing users to easily tweak their sound. It includes comprehensive EQ controls that provide a wide range of tonal options. Musicians can shape their sound with precision using the bass, midrange, and treble controls, enabling them to dial in their signature tone effectively. Furthermore, the inclusion of a variable high-pass filter assists in tightening the low-end response, making it versatile for different musical genres.

Connectivity is another strong point of the Genz-Benz 9.2. It features multiple input options, including XLR and 1/4-inch jacks, making it compatible with a variety of instruments, including electric guitars and basses. The amp also offers effects loops and direct output for easy integration with external processing units and recording systems, enhancing its utility in both live and studio settings.

Durability is a hallmark of Genz-Benz products, and the 9.2 is no exception. It is built to withstand the rigors of touring musicians and has a robust chassis designed to endure the demands of rigorous travel. This reliability ensures that users can count on the amp to perform consistently night after night.

In summary, the Genz-Benz 9.2 is an outstanding amplifier that combines powerful output with advanced technologies and user-friendly features. Its Class D architecture, extensive EQ capabilities, and versatile connectivity options make it a top choice for musicians looking to elevate their sound, whether on stage or in the studio. With Genz-Benz's reputation for quality and performance, the 9.2 amplifier stands as a reliable option for serious audio professionals.