Fender SIXTY guide

G.EFFECTS RETURN JACK- This balanced jack inputs signal to the Master Volume control which drives the power amp section. It automatically disconnects the preamp when used. This jack is useful with the effects loop feature, or when using the KXR 60 as a slave amp.

H.MASTER VOLUME CONTROL- This control adjusts the level of the signal coming out of the preamplifier sec- tion. This control is used in conjunction with the Channel Volume control to set the overall sound level of the amplifier. In order to maximize headroom and minimize noise, instruments with low-level output will require a high Channel Volume setting and a low Master Volume setting, while other instruments will require a lower Channel Volume and higher Master Volume setting. It is recommended that the Master Volume control be set as high as possible for maxi- mum DELTACOMPTM compressor range.

I.TAPE IN JACK- Two RCA style jacks provide an input for an unbalanced, mono signal from a tape player or CD player. This signal is summed with the signal from the preamp inputs and provides the user the ability to play along with pre-recorded music.

HEADPHONE JACK- This jack allows the use of stereo headphones for private listening. When this jack is used, the internal speaker is disconnected. WARN-

ING: BE CAREFUL WHEN USING HEADPHONES, AS EXCESSIVE VOLUME WILL DAMAGE YOUR HEAR- ING.

POWER INDICATOR- When this LED is illuminated, the KXR 60 is receiving power.

POWER SWITCH- This switch turns the KXR 60 On or Off.