Fishman Aura Pro manual Restore Factory Defaults

Page 16

Restore Factory Defaults

1.Unplug the guitar and move the tone controls to the center detent position.

2.Press and hold the Tuner and Anti-Feedback buttons simultaneously.

3.Plug in the guitar. Continue to hold the Tuner/Anti-Feedbackbuttons for three seconds after you plug in.

4.Release the Tuner/Measure buttons then unplug the guitar to complete

the procedure. Defaults:

EQ for all four Images reverts to flat.

Relative Phase settings return to default state.

Anti-Feedback frequency is reset to 100Hz.

16

Image 16
Contents User Guide Aura PRO Retail Page Troubleshooting WelcomeImage Chart Image # Instrument Name Microphone Mic DistanceFundamentals Quick Start Control Feedback Power Low Battery IndicatorTuner Volume ControlsImage BlendPickup EQ Tone Controls & Play/Edit SwitchProgrammable Image EQ Phase global Phase SwitchesRelative Phase pickup phase Battery Replacement Anti-FeedbackInput Trim and VU Meter Page Restore Factory Defaults Electrical Specifications Rev C