Yorkville Sound YS1044 Master Control, Master Clip, Line Out ¼ -inch TRS balanced, Head Phones

Page 6

Input Clip LED

The input clip LED will only turn on when the Input signal from a source such as a keyboard is too hot and will clip the input circuits, to alleviate this, turn down the gain of the source unit.

Tone Controls

There are 3 tone controls bass, mid and treble to cover the entire audio spectrum. Each control permits a wide range of sonic adjustment, a boost or cut of 15 dB. The center position denotes 0 dB cut/boost.

Channel 3

Channel 3 has been added as an extra channel for monitoring purposes, the signal does not mix in with the main bus and thus the lineout is not affected by it. The input has it own gain control, located

on the rear of the unit, for adjusting the audio level.

Master Control

0

Gain10

Ch 3Monitor

 

The Master Volume controls the output level of the K2.

Master Clip

Ch 3 Input

 

The Master clip LED will come on when the signal is clipping going to the amplifier. When this occurs either reduce the gain of either channel or reduce the equalization.

Line Out ¼ -inch TRS (balanced)

Located at the front, this jack is used to connect directly to the mixing consoles. Use this when performing live or in a recording studio. The Master Volume control has no effect on the line out audio level.

Note: Please note that the signal from Channel 3 does not mix in with the main bus signal and is not sent the line out. It is meant for stage monitoring only

Master

 

4

5

6

 

 

 

3

 

7

Master

2

 

8

Clip

1

 

9

0 10

Power

Head Phones

Located on the front panel, the ¼-inch Phone jack is provided for your listening pleasure. If the jack is used, it disconnects the signal to the amplifiers thus muting the K2.

Cooling system

The K2 is cooled by a set of heat sinks located at the back of the unit, always keep that area clear so that the heat is dissipated properly otherwise the unit will overheat and shut down.

Phones

Line Out

Balanced



Image 6
Contents N e r ’ s M a n u a l Y B O a R D a m p l i f i e rRead Instructions Power CordService Veuillez Lire le ManuelTraynor Keyboard Amps Series K2 200w, 10 inch / 4 inch / 2.5 inchFeatures Channel Line Out ¼ -inch TRS balanced Master ControlMaster Clip Head PhonesMemory Newton Garwood Série d’Amplificateur Traynor Pour Clavier K2 200w, 10 pouces / 4 pouces / 2.5 poucesCaractéristiques Canal Prise Pour Casque d’Écoute Contrôle de Volume PrincipalSortie Ligne ¼ -pouce TRS symétrique Système de RefroidissementSpécifications Page Block Diagram for Keymaster K2 Unlimited Warranty Garantie IllimitéeCanada Canada
Related manuals
Manual 11 pages 50.59 Kb

YS1044 specifications

Yorkville Sound has long been recognized for its commitment to innovation and quality in the audio equipment industry. One of the standout products in their lineup is the YS1044, a versatile and robust speaker that caters to a variety of audio needs, from live performances to installations.

The YS1044 is designed with a two-way configuration, featuring a powerful 10-inch woofer and a 1-inch driver that delivers clear mid-range frequencies and crisp highs. This configuration ensures that audio playback is not only loud but also richly detailed, making it ideal for both music and spoken word applications. The speaker boasts a frequency response range from 50 Hz to 20 kHz, allowing it to reproduce a wide array of sounds effectively.

One of the defining technologies of the YS1044 is its high-efficiency amplifier. This advanced amplifier is engineered to provide ample power to the speaker while maintaining a low distortion level, ensuring that sound clarity remains intact even at higher volume levels. Additionally, the integrated protection circuit safeguards the speaker components against overheating and over-excursion, prolonging the lifespan of the product.

The YS1044 features a rugged yet stylish enclosure built from high-quality materials. The cabinet is designed to withstand the rigors of live performances, and its durable finish helps protect against scratches and dings. For added convenience, the speaker is equipped with a pole mount socket, allowing for easy integration into various setups, whether on stage or in a permanent installation.

In terms of connectivity, the YS1044 is designed with versatility in mind. It includes both XLR and 1/4" inputs, accommodating a range of audio sources and making it easy to connect to mixers or other audio equipment. The straightforward control panel allows users to adjust settings effortlessly, ensuring optimal performance tailored to any environment.

Overall, the Yorkville Sound YS1044 stands out as a powerful and flexible speaker solution. Its combination of advanced technologies, robust design, and user-friendly features makes it an excellent choice for sound professionals and enthusiasts alike. Whether for concerts, events, or permanent installations, the YS1044 delivers outstanding performance that is sure to impress.