Ampeg manual An Introduction to your new Ampeg SVP-PRO Bass Preamp, Features

SVP-PRO Bass Preamp

An Introduction to your new Ampeg SVP-PRO Bass Preamp

The harmonically rich sound and legendary performance of the AMPEG SVT are redefined in the SVP-PRO. This dynamic preamp delivers unsurpassed quality, reliability and tonal flexibility, offering the classic vibrancy of tubes as well as contemporary features. The SVP-PRO is the preamp section of our much-respected SVT-2 PRO. All of the features and controls of your SVP-PRO are covered in detail within the pages of this user’s guide. We recommend going over them before you use the preamp.

Features

In the world of high performance bass amps, Ampeg’s SVT amplifiers stand alone. Keeping with true Ampeg tradition, the SVP-PRO Bass Preamp offers you more performance and flexibility than any other preamp in its class. Listed below are some of the outstanding features of your new preamp - features which set it apart from the competition! Additional infor- mation on these features can be found on the pages indicated.

•PAD: A switchable attenuator pad, this feature is perfect for basses with active electronics or very “hot” pick- ups (page 4).

•MUTE SWITCH: Lets you cut the sound from the amp, letting you tune your bass in private (page 4).

•ULTRA LOW, ULTRA HIGH AND BRIGHT SWITCHES: Lets you tailor your sound in many different ways “with the touch of a button” (page 4).

•5-POSITION MIDRANGE SELECTOR: Take your pick from the five center frequency points available to get just the right midrange voice (page 4).

•9-BAND GRAPHIC EQ: Use as a “second channel” for bass solos, or to shape your sound to your own exact- ing standards. An independent level control lets you adjust the Graphic EQ volume. Switchable at front panel or with a footswitch (page 4).

•TRANSFORMER BALANCED LINE OUT JACK: For connection to a recording console, PA system or external power amplifier. Switchable for Pre- or Post-EQ operation (page 5).

Important Safeguards and Precautions:

All Ampeg products are designed for continuous safe operation, as long as common sense is used and steps are taken to help avoid certain problems. Abiding by the following rules can help prevent damage to your equipment, yourself, and others.

•The unit is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord.

•Connect the unit ONLY to a properly grounded AC outlet of the proper voltage for your unit.

•Avoid sudden temperature extremes, rain and moisture. Also, avoid sudden and intense impact. (If the unit has been subjected to any of the preceding abuses, have it looked at by an authorized service center.)

•NEVER set the unit on a support that might give out under its weight.

•Unplug the unit before cleaning it. NEVER spray liquid cleaners onto the unit. Wipe it with a slightly dampened, lint-free cloth to remove dirt and film.

•Do not use the unit if it has sustained damage to the chassis, controls, or power cord. Refer the unit to an authorized service cen- ter for inspection.

•Audio equipment capable of producing high volume levels are also capable of inflicting permanent hearing loss or damage, if the exposure to such levels is prolonged. Such damage is progressive and irreversible! Consider using quality hearing protection devices.

3