PB800 PortaBass Bass Amplifier Head
Technical Specifications
OUTPUT POWER RATING | 800 Watts RMS, 2 ohm load, 120VAC |
| 550 Watts RMS, 4 ohm load, 120VAC |
|
|
TONE CONTROLS |
|
Ultra Low: | +6dB @ 40Hz |
Low: | ±16dB @ 100Hz |
Mid: | ±17dB @ Selected Frequency |
Mid Freq: | 180Hz - 1.8kHz |
High: | ±15dB @ 5kHz |
Ultra High: | +8dB @ 10kHz |
|
|
GAIN | 65dB |
|
|
SIGNAL TO NOISE RATIO | 80dB typical |
|
|
POWER REQUIREMENTS |
|
Domestic: | 120VAC, 60Hz, 200VA typical (925VA @ full power) |
Export: | 100/120VAC, 50/60Hz, 200VA typical (925VA @ full power) |
| |
|
|
SIZE AND WEIGHT | 15” W x 3.75” H x 11.5” D; 22 lbs. |
|
|
Ampeg reserves the right to change specifications without notice.
www.ampeg.com
Proudly Made in the U.S.A. by Ampeg • ©2003 SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N