BA-112 BASS AMPLIFIER
TOP PANEL:
ON
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0dB |
|
| 1 2 3 4 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
| INPUT |
|
| VOLUME | STYLE | TREBLE ULTRA MID | BASS | CD INPUT | LINE OUT HEADPHONES | POWER | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
1.0dB INPUT: Connect your “passive” bass guitar here using a shielded instrument cable. This input is not padded and is best suited for basses without active electronics or “hot” pickups.
2.
3.VOLUME: Use this control in conjunction with your instrument’s volume controls to adjust the output level of the amplifier. The
4.STYLE: This
5.TREBLE: Use this control along with the style control to adjust the high frequency level of the amplifier. The treble control has a 36dB range at 10kHz.
6.ULTRA MID: Use this control along with the style control to adjust the midrange level of the amplifier. This control has a 30dB range @ 500Hz.
7.BASS: Use this control along with the style control to adjust the low frequency level of the amplifier. This control has a 36dB range @ 50Hz.
8.CD INPUT: Use these RCA jacks to con- nect the line level (or headphones) output of a CD player or tape deck. The two jacks sum the stereo signal into a mono signal which is fed into the
9.LINE OUT: This jack supplies a
10.HEADPHONES: For private practice sessions, plug a pair of headphones here. The internal speaker is disconnected when the headphones jack is used.
11.ON LED: This LED lights when the amplifier is plugged in and turned on.
12.POWER: Use this switch to turn the amplifier on and off – on is in the up position.