Ampeg B-200R manual Front Panel

Page 4

The Front Panel:

 

 

 

 

6

 

 

 

 

 

 

 

 

 

1

2

3

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

7

8

9

10

 

 

 

 

 

1.0dB Input accepts a standard 1/4” instrument plug from your bass. This input is suited for use with instruments that have passive electronics.

2.-15dB Input accepts a standard 1/4” instru- ment plug from high output basses. This input is padded 15dB to compensate for higher output sources and is suited for use with basses that have active electronics or high output pickups.

3.Ultra Low increases the low frequency output by 7dB at 40Hz. This adds to the rumble and overall feel of the low bass notes.

4.Ultra Mid decreases the mid frequency out- put by 6dB at 600Hz. This removes some of the middle frequencies for a “contoured” sound.

5.Ultra High increases the high frequency out- put by 7dB at 5kHz. This adds crispness to your sound.

6.Peak LED illuminates when the Gain control (#8) is set too high. This indicates overdriving of the preamplifier which causes clipping. (See the Gain control, #8.)

7.Signal LED illuminates when the Gain control (#8) is adjusted properly. (See the text for the Gain control.)

8.Gain must be adjusted to match the output of your instrument to the amplifier. For the proper setting, turn on the amplifier, rotate the Gain control and the Master control (#13) fully count- er clockwise and begin playing your bass. Rotate the Gain control clockwise until the Signal LED (#7) illuminates while playing and the Peak LED (#6) flashes occasionally.

9.Bass adjusts the output level of the low fre- quencies and offers a cut or boost of 12dB at 70Hz.

10.Low Mid adjusts the output level of the lower midrange frequencies and offers a cut or boost of 12dB at 300Hz.

11.High Mid adjusts the output level of the upper midrange frequencies and offers a cut or boost of 11dB at 1.5kHz.

12.Treble adjusts the output level of the high frequencies and offers a cut or boost of 14dB at 7kHz.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Table of Contents Introduction Front Panel Master controls the overall output level of the amplifier Important Information About Tubes and Tube Products Brief History Of The TubePreamp Tube Types And Usage Nature Of Tubes Why And When To Replace Them Survival Tips For Tube Amplifiers System Block Diagram Page 200R Technical Specifications

B-200R specifications

The Ampeg B-200R is a standout model in the realm of bass amplification, particularly known for its rich tone and exceptional versatility. This combo amplifier is designed for bassists who seek a reliable and powerful sound, whether practicing at home, jamming with friends, or performing on stage.

One of the most prominent features of the B-200R is its 200-watt RMS power output, providing ample volume to cut through any mix. The amp is equipped with a 15-inch custom speaker, which delivers deep, resonant bass tones, ensuring that low-end frequencies are well represented. The combination of the substantial power and the large speaker allows for an impressive dynamic range that caters to various musical styles.

The Ampeg B-200R boasts several innovative technologies that enhance its usability. The built-in preamp utilizes Ampeg’s advanced circuitry, granting musicians a broad palette of tones. The amp features a three-band EQ, consisting of bass, midrange, and treble controls, allowing players to sculpt their sound with precision. Additionally, the midrange frequency can be adjusted via a midrange knob, providing even greater flexibility for shaping the tonal characteristics of the instrument.

Another significant feature is the ultra-hi and ultra-lo switches that can be engaged to boost specific frequencies, ensuring the bass can stand out in a mix or deliver a more subdued presentation when desired. This versatility makes the B-200R suitable for a wide array of musical genres, from rock and pop to jazz and funk.

In terms of connectivity, the B-200R comes with an XLR direct output for easy integration with PA systems or recording equipment, allowing musicians to easily capture their tone without compromising sound quality. It also features a headphone output, perfect for silent practice sessions.

The overall build quality of the B-200R is another characteristic that stands out. It features a rugged, roadworthy design that ensures durability during transport and performance. Its classic look, complemented by the signature Ampeg diamond grille and a stylish vinyl covering, appeals to bassists who appreciate both aesthetics and sound quality.

In summary, the Ampeg B-200R is a powerful, versatile bass amplifier that combines modern features with trusted Ampeg tradition, making it an excellent choice for bass players at any level. Its robust construction, superior tone shaping capabilities, and convenient connectivity options provide a reliable solution for all bassists looking to enhance their sound.
Top Page Image Contents