1.2 Control elements
1.2.1 Front panel
1
Fig. 1.1: Front panel control elements
INPUT is the GX108’s 1/4" jack input for your guitar. Use a commercial 1/4" jack mono cable with good mechanical and electrical shielding.
2
The GAIN control governs the degree of distortion produced by your GX108.
+As high gain settings result in an output signal with plenty of treble frequencies, it might be necessary to adapt the
3
4
5
6
7
The LEVEL control determines the overall volume of the GX108.
The BASS control in the EQ section allows you to boost or cut the bass frequencies.
With the MID control you can boost/cut the midrange frequencies.
The TREBLE control adjusts the upper frequency range.
Use the ON/OFF button to switch your GX108 on or off: the LED located between the MID and TREBLE controls lights up when the unit is switched on.
1.2.2 Rear panel
Fig. 1.2: Rear panel connectors
4 | 1. INTRODUCTION |