Phantom Tech Guitar Amplifier owner manual Features

Page 4

Welcome to a new world in guitar amplification. Combine the functionality you want with the tried and true technology of tube tone, wrap that in a completely new approach to the structure of a high gain sound, and unleash the dynamic range of Diamond Amplification’s Phantom.

This manual will walk you through the features, controls and tonal possibilities available to you. It is highly suggested that you read through this manual in its entirety before dialing in your new tone! The information in this manual will familiarize you with this amp’s capabilities,

FEATURES

100 watts (4 x Svetlana “Winged C” EL34 - 6 x selected 12AX7A-C)

2 fully independent channels (Channel 1 - Clean/Channel 2 - Crunch)

Both Channels feature Volume, Gain, Bass, Middle, Treble, Presence

Dual Volume/Gain Channel 2 (switchable, allows for two gain settings with 2 volumes for level adjustment to match volumes)

Rear panel low frequency 3-position adjustment switch (allows for changing the amount and character of the bottom end - effects both channels)

2 switch foot controller for access to all three volume/gain controls (Channel 1, Channel 2A, Channel 2B) connected with a TRS cable.

Footswitch connects through TRS (“stereo”) 1/4" jacks allowing for switching through a variety of other devices.

110v, 120v, 220v and 230/240v power selection.

Ohm selector switch for 4, 8 or 16ohm output.

Green LED's light the box for a distinctive look on stage, along with a unique silver- vein steel front grille and etched zinc logo.

All components specifically spec'd and tested by Diamond before inclusion in the product.

Independent LED's indicate which volume/gain is active.

Properly designed, tube-driven effects loop (so the loop will automatically engage when cables are plugged in and disengage when cables are removed).

Front panel Effects Return control that acts as an overall master when loop is engaged for quick overall volume adjustment.

PHANTOM OWNER’S MANUAL (rev.2)

PAGE 1 OF 17

Image 4
Contents Page Page Page Features Front Panel Rear Panel Making Connections Load Amp Setting Before YOU Begin Quick Start GuidePOWER/STANDBY Dialing LOW Focus Effects LoopPage TONE/VOLUME Controls Page Dialing in Channel 1 Clean Dialing in Channel 2 Crunch Front Panel Switching SwitchingPhantom Controller Footswitch Alternate Switching Methods Tubes Tube Layout CHANGING/REPLACING TubesDiagnosing Tube Problems Page Diamond AMPLIFICATION, INC Langfield RD HOUSTON, Texas