C O N N E C T I O N S
This NADY AUDIO powered mixer uses 4 different types of audio connectors for the various input/output connections: (1) XLR balanced; (2) 1/4” TRS phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4” TS unbalanced;
(4) RCA pin unbalanced
Figures
1.Balanced XLR input/output connections
2.Stereo headphone connection with 1/4" TRS plug
3.1/4" mono (TRS) plug used as unbalanced input/output
4.1/4" stereo (TRS) plug used as balanced input/output
5.1/4" TRS plug used as Insert Send/Return
6.RCA pin plug for unbalanced input/ouput
MICROPHONE INPUTS | GROUP & MIX OUTPUTS | |||
2 | 1 | 1 | 2 |
|
| 3 | Ground (Screen) | 3 |
|
|
|
| ||
|
| Cold |
|
|
|
| (Out of Phase Signal) |
|
|
|
| Hot |
|
|
|
| (In Phase Signal) |
|
|
Socket (female) | Plug (male) | 1. | ||
|
|
|
| |
HEADPHONES
Tip =
Left signal
Ring =
Right signal
Sleeve =
Ground/Shield
Tip
Ring
Sleeve
Strain relief clamp
2.
UNBALANCED USE OF
MONO 1/4” PLUGS
Tip =
Signal
Sleeve =
Ground/Shield
Tip
Sleeve
Strain relief clamp
3.
BALANCED USE OF STEREO 1/4” PLUGS
Tip = hot (+ve)
Ring = cold
Sleeve =
Ground/Shield
Tip
Ring
Sleeve
Strain relief
clamp4.
1/4” STEREO PLUG USED AS INSERT SEND/RETURN
TIP | SLEEVE | |
Send to External | ||
Ground (Screen) | ||
Device | ||
Strain relief clamp |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RING |
| Ring |
|
|
| ||
|
|
|
| Sleeve | 5. | |||
Return from External Device |
|
|
| |||||
Tip |
|
| ||||||
|
|
|
|
|
| |||
RCA PIN PLUG
Sleeve = Ground (Shield)
Pin =
Signal
6.
12