| SPECIFICATIONS |
|
POWER AMP OUTPUT |
|
|
8Ω Total Impedance | 100W | |
4Ω Total Impedance | 175W | |
INPUTS |
|
|
1/4” TRS balanced/unbalanced mic/line level | 8 | |
XLR balanced mic level | 8 | |
RCA tape input | 2 | |
CHANNELS | Rotary Control | |
Level |
| |
Effect | Rotary Control | |
Low EQ | 80Hz ±15dB | |
Hi EQ | 12KHz ±15dB | |
MASTER SECTION | Rotary Control | |
Master Volume |
| |
Delay On/Off | Push Button Switch | |
Digital Delay Level | Rotary Control | |
Digital Delay Time (80mS, 120mS, 160mS, 200mS) | ||
AUDIO | >120dB | |
S/N Ratio |
| |
THD Power output, 20Hz to 20KHz | <0.1%@100W/4 ohms | |
CROSSTALK (1KHz @ 0dBu, channel in to master.......................................................................................................................................................................output) | ||
Channel fader down |
| |
FREQUENCY RESPONSE (Mic input to output) | ±2dB | |
Line level o/p @ +4dBu into 600Ω . |
| |
Power amp o/p 1 watt into 8Ω | ±2dB | |
SENSITIVITY @ MIXER OUTPUT +4dBu with Master and channels controls set to MID | ||
Mic/Line | ||
Tape in | ||
MAX INPUT LEVEL | ||
XLR |
| |
1/4” | +16dB | |
MICROPHONE PREAMP E.I.N. (150( Terminated, max. Gain) | ||
POWER CONSUMPTION | 200W | |
POWER REQUIREMENTS | ||
FUSE | 5x20mm glass type 4A/250V for 115VAC, 2A/250V for 230VAC, | |
DIMENSIONS (H x W x D) | 5.25”x 19.25”x 9.5” (13.3 x 48.9 x 24.1 cm) | |
WEIGHT | 19.3 lbs. (8.8 kg) | |
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
9