Nady Systems owner manual IR Sensor Nady Tru-Dispersion Nady Speaker IRW-2PA

Page 6

INSTALLATION

Speakers

IR Sensor

Wireless Mic

Nady

IRW-2PA

 

IR Sensor

Nady

Tru-Dispersion Nady

Speaker IRW-2PA

IR Sensor

IR Sensor

HT-6SC HANDHELD MICROPHONE TRANSMITTER

(1)

(3) (2)

(1)Battery Compartment/Cover

(2)Power Switch

(3)Power LED Indicator

1. Transmitter Set-up

Unscrew and remove the Battery Compartment Cover (1) by sliding it down off the microphone to expose the battery holders. Insert 2 fresh AA alkaline batteries, NiMH rechargeable batteries, or the optional IR-HBP battery pack while observing the correct polarity as marked, and screw the cover back on the battery compart- ment.

(Note: Make sure the transmitter is off when changing the batteries.)

2. Operation

a. Slide the Power Switch (2) to the ON position. The Power LED Indicator (1) will light green, indicating that the transmitter is on. In the case of low batteries, the indicator will be off, indicating that the batteries should be replaced with fresh ones or the batteries should be recharged.

The IRW-2PA IR Reception LED Indicator (6) of the corresponding channel should change from red to green if the sensors are properly receiving the signal. If it is not, check the IRW-2PA power, sensor connections, and make sure the transmitter is within range of the sensor. For optimum performance and range, make sure that the IR emitter, at the base of the transmitter, is not covered by the hand and has an unobstructed line-of-sight with the IR sensor.

b. While speaking into the microphone, increase the corresponding Volume Con- trol (7) on the IRW-2PA to the desired level. The EQ Bass and Treble controls can also be adjusted for audio preference. The microphone is now ready to use.

[Note: Observe care in selecting volume, transmitter location and speaker place- ment so that acoustic feedback (howling and screeching) will be avoided.]

If there is no audio, check your speaker connections and verify proper impedance is being used. If there is still no audio, try turning the IRW-2PA power switch on and off in case the amp went into short-circuit protection mode due to accidental wiring during speaker installation.

6

11

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Important Safety Instructions Warning IRW-2PAContents SpecificationsUsing this Manual Optional AccessoriesService IRW-2PA System ContentsIRW-2PA Infrared PA System System FeaturesLT-6SC Bodypack Transmitter HT-6SC Handheld Microphone TransmitterInstallation HT-6SC Handheld Microphone TransmitterTransmitter Set-up IR Sensor Nady Tru-Dispersion Nady Speaker IRW-2PA IR SensorIRW-1S Infrared IR Sensors Additional SensorsWall Mounting IRW-2PA Wireless Receiver PA

IRW-2PA specifications

Nady Systems IRW-2PA is a sophisticated wireless microphone system specifically designed for professional audio applications, featuring remarkable technology and user-friendly characteristics. This system offers a reliable solution for musicians, presenters, and audio professionals seeking high-quality sound without the constraints of traditional wired setups.

At the core of the IRW-2PA is its UHF (Ultra High Frequency) transmission technology, which ensures exceptional sound clarity and minimal interference. This frequency range provides a robust and stable transmission, making it suitable for live performances, corporate events, and educational environments. The system also offers multiple channels to avoid any possible signal conflicts, ensuring seamless operation in busy environments.

One of the standout features of the IRW-2PA is its dual-channel receiver, which allows users to connect two microphones simultaneously. This is especially beneficial for duets or interviews, where two speakers can be amplified without the need for multiple receivers. The receiver's backlit display provides clear visibility of essential information such as channel selection, signal strength, and battery life, allowing for quick adjustments even in low-light conditions.

The IRW-2PA includes a handheld microphone that is ergonomically designed for comfort and ease of use. The microphone features a cardioid pickup pattern, which effectively captures sound from the front while minimizing background noise, providing a professional sound that is crucial for live performances.

Another notable characteristic is the system's wide frequency response range, ensuring that it accurately reproduces vocals and instruments with clarity. This, combined with a high dynamic range, allows for effective handling of varied audio sources without distortion.

Battery life is another important aspect of the IRW-2PA. The system utilizes rechargeable batteries, which not only save costs over time but also ensure convenience for users who are frequently on the go. The system can operate for several hours on a single charge, making it an ideal choice for long events and performances.

Overall, the Nady Systems IRW-2PA stands out for its advanced technology, user-friendly features, and reliable performance. Its combination of dual-channel capability, ergonomic design, and robust UHF transmission makes it an excellent choice for professionals in need of a versatile and high-quality wireless microphone system. With its attention to detail and commitment to sound excellence, the IRW-2PA truly represents the pinnacle of modern audio technology.
Top Page Image Contents