With only three buttons, you can adjust any function
on the receiver | on the transmitter |
14Basic functions of the Sennheiser operating menu
A special feature of the Sennheiser 3000 series is the similar operation of transmitters and receivers. In stressfull situations, for example on stage or during a live show or presentation, it is important that the transmitter is easy to operate and that adjustments to the transmitter settings can be made quickly and “without looking”. Therefore, the necessary operating steps for each device must be similar.
Press the SET button to get into the setting mode.
By briefly pressing the SET button, the display begins to flash and you enter the top menu level. By briefly pressing SET again, the display switches to the next menu and so on.
Press the / buttons to adjust the settings of the selected menu. | ||
| Depending on the menu selected, you can adjust the following | |
| settings by pressing the t/s buttons: | |
| on the receiver | on the transmitter |
| receiving frequency | sensitivity of the microphone input |
| receiving channel | transmission |
|
| frequencytransmission channel |
|
| “lock mode” function |
Press the SET button to store the setting.
Settings which are “relevant to the transmission reliability” or have an impact on the complete radiomicrophone system have to be stored before they become effective. To store a setting, press the SET button for more than a second. “Sto” briefly appears on the display, indicating that your setting has been stored. The display then switches back to the standard display.
If you do not press the / buttons or the SET button for more than 14 seconds, the setting mode is automatically left and the microprocessor switches back to the standard display.
15 Adjusting the sensitivity
When briefly pressing the SET button, the display indicates the preselected sensitivity. The possible settings for the ME 3005 e microphone head are the following:
0 dB | for singers with soft voices |
- 10 dB | for singers with normal voices using |
| the microphone at a greater talking distance |
- 20 dB | for singers with loud voices |
- 30 dB | for rock singers / |
The possible settings for the ME 3005 microphone head are the following:
0 dB | for speakers with soft voices |
- 10 dB | for speakers with normal voices using |
| the microphone at a greater talking distance |
- 20 dB | for speakers with loud voices |
- 30 dB | for |
With the / | buttons you can now select a different sensitivity. If you |
do not press the / buttons or the SET button for more than 14 seconds, the setting mode is automatically left and the microprocessor switches back to the standard display.
Note:
In order that you can instantly test the new sensitivity, the setting becomes effective immediately without having to be stored.
Tip:
Try out each sensitivity several times. For soundchecks please bear in mind that the volume may appear to be higher during rehearsal in an empty room than later during the show. Experience also shows that the user will normally speak louder in front of the audience.
34 | 35 |