Sennheiser SLT23460FC instruction manual Specifications, Figure-of-eight

Page 10

English

the signal totally disappears – the two channels are now set identical – now pan channel two fully left and channel three fully right for normal operation). Channels two and three are controlled as a single fader (mechanically or electrically coupled together). The stereo width is controlled by the relative levels – less side is a narrower image, more side is a wider image. The displacement of the faders by 3 dB, as shown in the diagram as an example, results in 1:1 ratio matrixing.

During matrixing, it should be taken into account that the direction of off-axis sound signals can be determined less and less at high frequencies due to the increasing directivity of the shotgun microphone. This may lead to diffused spatial effects, which can be desirable or undesirable depending on the recording situation. In case of doubt, the proportion of the S signal should not be chosen too high. In some cases, it might be necessary to reduce the treble in the S channel on the mixing console. At low frequencies below 300 Hz, it is very difficult to locate sounds for physiological reasons. Since the S system of the microphone, due to its design principle, is more sensitive than the M system to low-frequency interference caused for example by wind, the bass in the S channel should be reduced if required (eg: with a high-pass filter).

Specifications

Acoustic operating principle

M:

pressure gradient /

 

 

interference tube receiver

 

S:

pressure gradient receiver

Pick-up pattern

M:

super-cardioid/lobar

 

S:

figure-of-eight

Sensitivity at 1000 Hz

M:

25 mV/Pa (-32 dBV)

 

S:

10 mV/Pa (-40 dBV)

Frequency response

40 - 20,000 Hz

Max. SPL

130 dB SPL (63 Pa)

Max. output voltage

1.5 V

Equivalent noise level

M:

14 dB-A / 26 dB-CCIR

 

S:

22 dB-A / 34 dB-CCIR

Output impedance at 1000 Hz

< 25 Ω

Min. load impedance

1 kΩ

Power supply

P48: 48 ± 4 V / 2 x 2.3 mA

Connector

5-pin XLR, male

Dimensions

Ø 19 mm x 280 mm

Weight

220 g

Operating temperature range

-20 to +60 °C

Humidity range

< 95 % relative humidity

10

MKH 418 S

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MKH 418 S P48 U Page Merkmale LieferumfangSpeisung Zubehör3dB Anmerkungen zur MS-StereofonieTechnische Daten XLR-5MPowering FeaturesDelivery includes Accessories 3dB Specifications Figure-of-eightCaractéristiques ’emballage contientAccessoires AlimentationPropos de l’enregistrement stéréo M-S Température de fonctionnement Taux d’hygrométrie Caratteristiche Materiale in dotazioneAccessori Alimentazione3dB Dati tecnici Características Alcance del suministroAlimentación AccesoriosObservaciones sobre la estereofonía MS Datos técnicos Español Eigenschappen Omvang leveringVoeding Toebehoren3dB Opmerkingen over stereofonieTechnische gegevens MKH 418 S Polardiagramme Polar diagrams Diagrammes polaire Diagrama polar Pooldiagram5dB/div = M + S = M S MKH 418 S Certification KonformitätserklärungApproval Certificazione

SLT23460FC specifications

The Sennheiser SLT23460FC is a standout model in the realm of wireless microphone technology, designed specifically for professional audio applications such as live performances, corporate events, and broadcasting. Its robust features and state-of-the-art technology make it a go-to choice for sound engineers and performers who seek reliability and sound quality.

One of the main features of the SLT23460FC is its exceptional audio quality. It utilizes Sennheiser’s proprietary digital transmission technology, which ensures crystal-clear sound reproduction with minimal latency. This technology is essential for live performances where any delay can negatively impact the overall experience. The RF performance also shines, covering a wide frequency range that minimizes potential interference from other wireless devices.

Built with versatility in mind, the SLT23460FC offers multiple microphone integration options. It is compatible with a wide selection of Sennheiser microphones, allowing users to select the mic that best fits their specific needs, whether for speech, singing, or instrument amplification. This flexibility is particularly beneficial for venues that host a variety of performances, as it allows for quick transitions between different types of events.

Additionally, the SLT23460FC features advanced battery management with an impressive runtime, allowing users to perform for extended periods without the worry of running out of power. The system is designed with user-friendliness in mind, equipped with an intuitive interface for easy operation and monitoring of settings.

Security is another critical aspect of the SLT23460FC, as it incorporates encryption technology to protect against unauthorized access and signal interference. This security feature is particularly beneficial for corporate and sensitive environments where data integrity is paramount.

In terms of build quality, the SLT23460FC is constructed using durable materials that withstand the rigors of professional use. Its lightweight, ergonomic design ensures comfort during extended use, making it ideal for performances that last several hours.

Overall, the Sennheiser SLT23460FC represents a blend of advanced technology, user-friendly features, and exceptional audio performance, making it an essential tool for anyone serious about achieving high-quality sound in a variety of settings. Whether for live concerts, presentations, or broadcasting, the SLT23460FC delivers reliable performance and sound clarity that professionals demand.
Top Page Image Contents