Sennheiser 912 S manual Operating Mode

Operating Mode ￿:

yPermanently switched on:

disables the switch completely, the microphone is permanently switched on.

yPush-to-talk (PTT):

The microphone is switched on as long as the membrane switch is pressed.

yPush-to-mute (PTM):

The microphone is switched off as long as the membrane switch is pressed.

yOn/off (factory preset):

turns the switch into push to switch on, push again to switch off.

Frequency response curve ￿:

yLow cut:

reduces the bass frequencies to minimize structure-born noise – this switch (1) is independent of the other three DIP switches and can be used in any of the following conditions (eg: you can use the low cut as well as the bass boost if placing the microphone on a small table with a high risk of structure-born noise).

yLow boost:

extends the bass response to compensate for putting the microphone on a small table.

yLow and high boost (factory preset): extends the frequency response at both ends.

yLinear:

is the natural response of the microphone.

5