Sennheiser SKM 500 G2 manual Selecting the standard display Dislpy, Entering a name Name

Page 22

ew500_SKM.book Seite 54 Mittwoch, 5. November 2003 9:13 09

Selecting the standard display – DISLPY

Via the “DISPLY” menu, you can select the standard display:

Selectable standard display Contents of standard display

“FREQ”

“NAME”

“CHAN”

Entering a name – NAME

Via the “NAME” menu, you can enter a freely selectable name for the radiomicrophone. You can, for example, enter the name of the performer for whom the adjustments have been made.

The name can be displayed on the standard display and can consist of up to six characters such as:

yletters (without pronounciation marks),

ynumbers from 0 to 9,

yspecial characters e.g. () - . _ and spaces.

To enter a name, proceed as follows:

Press the SET button to get into the setting mode of the “NAME” menu. The first segment starts flashing on the display.

With the / buttons you can now select a character. By briefly pressing a button, the display jumps either forwards or backwards to the next character. If you hold down a button, the display starts cycling continuously.

Press the SET button to change to the next segment and select the next character.

Have you entered the name completely? Press the SET button to store your setting and to return to the top menu level.

Loading the factory-preset default settings – RESET

Via the “RESET” menu, you can load the factory-preset default settings. Only the selected setting for the pilot tone remains unchanged. After the reset, the radiomicrophone is restarted and the standard display is shown on the display panel.

54

Image 22
Contents SKM 500 G2 Thank you for choosing Sennheiser Contents SKM 500 G2 radiomicrophone family Channel bank systemSafety instructions Delivery includesAreas of application Operating controls Indications and displays Operation and battery status indicationLC display panel Pilot display Mute displayModulation display Display backlightingPreparing the radiomicrophone for use Inserting/replacing the batteriesChanging the microphone head Ew500SKM.book Seite 44 Mittwoch, 5. November 2003 913 Using the radiomicrophone Switching the radiomicrophone on/offActivating/deactivating the lock mode Muting the radiomicrophoneButtons Operating menuOverview of menus Getting into the operating menu Adjusting a settingWorking with the operating menu Selecting a menuStoring a setting Exiting the operating menuOperating menu of the radiomicrophone 30 dBBank Switching between the channels in a channel bank Chan Adjustment tips for the operating menuSwitching between channel banks Bank Multi-channel operationAdjusting the sensitivity Sensit Selecting the standard display Dislpy Loading the factory-preset default settings ResetEntering a name Name Activating/deactivating the pilot tone transmission Pilot Activating/deactivating the lock mode LockExiting the operating menu Exit Troubleshooting Error checklistFor optimum reception Recommendations and tipsFor the SKM 500 G2 radiomicrophone For multi-channel operationCare and maintenance Specifications Microphone heads MMD Accessories2015