Specifications

Transducer principle	pre-polarised
	condenser microphone
Frequency response	20–20,000 Hz
Pick-up pattern	cardioid
Phantom powering	48 V/2.2 mA
Sensitivity
(free field, no load at 1 kHz)	7 mV/Pa;
	2.3 mV/Pa / 0.7 mV/Pa
	(with pre-attenuation)
Equivalent noise level
A-weighted (DIN IEC 651)	19 dB
CCIR-weighted (CCIR 468-3)	30 dB
Pre-attenuation	0, -10, -20 dB
Bass filter	linear
	roll-off 130 Hz, 6 dB/oct.
	cut-off 85 Hz, 18 dB/oct.
Max. sound pressure level	137/147/157 dB SPL
at 1 kHz	(depending on
	pre-attenuation)
Nominal impedance	100 Ω
Min. terminating impedance	1 kΩ
Connector	XLR-3
Dimensions	Ø 24 mm,
	length: 157 mm
Weight	198 g
	(without clamp and cable)