Pioneer AVM-P9000 Adjustments for Speaker, Operation at the Speaker Setting Menu, Overleaf

Page 51

5.Cancel the FAD/BAL Setting Menu by clicking the joystick.

Note:

• “F 00” is the proper setting when 2 speakers are in use.

Adjustments for Speaker

You need to make “with/without” (or yes/no) and “size” (bass reproducing capacity) selec- tion/adjustments depending on the installed speakers. The size needs to be set to Large if the speaker is capable of reproducing sounds of about 100 Hz or below. Otherwise select Small.

1.Select “SP Setting” by moving the joystick.

“SP Setting” is highlighted in green.

2.Click the joystick.

The Speaker Setting Menu appears.

The Front Left speaker is highlighted in green and in the lower right-hand corner of the screen the current settings of that speaker is shown.

Operation at the Speaker Setting Menu

 

 

 

Center

Front Left

 

 

 

 

 

 

Front Right

 

 

 

 

 

 

 

 

 

 

 

 

Rear Left

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear Right

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sub Woofer

 

 

 

 

 

 

Show the current settings

 

 

 

 

 

 

of the selected speaker

 

 

 

 

 

 

 

• To select a speaker, move the joystick up/down and left/right. You cannot move diagonally.

: Move the joystick left/right. : Move the joystick up/down.

Test Tone:

See “Adjusting the Speakers’ Output

 

 

 

Levels using a Test Tone” (p. 58).

Cross Over:

See “Selecting a Crossover Frequency” (p. 59).

SW Phase:

See “Correcting the Subwoofer’s Phase” (p. 59).

Audio Setting:

Select this to go to the Audio Setting Menu.

Return:

Completes operations at the Speaker Setting Menu, bringing you back to the

 

previous screen.

Continued overleaf.

Adjusting Audio (Basic)

50

Page 50 Page 52
Image 51
Page 50 Page 52
Contents AVM-P9000 Contents TV Tuner Before Using This ProductVolume Key FinderBefore Using This Product About This ProductVideo System of a Connected Component About This Manual Output Setting of the DVD PlayerFunction Setting PrecautionTo Ensure Safe Driving When Using a Display connected to Rear Video OutputResetting the Microprocessor PrecautionWhen using the 50-Disc Type Multi-CD Player Remote Control and Care BatteryReplacing the Lithium Battery To Listen to Music Operation for Each Source UnitSelect the desired source e.g. Multi-CD Player Turn the source OFF When connecting a Multi-DVD playerRaise or lower the volume Select the desired pictureVirtual Theater Quick Tour Virtual Theater Quick TourAnimation Menu StructureSwitching the Information Screen Entered title is displayed When playing a CD Text discInformation Screen Source Plate Display No Plate Source Plate Display Flip-Down Plate Display No PlateSwitching the Video ON/OFF Mode Using the Screen Pictures Selecting the VTR etcSelecting the Video Source Select Bgtv or Bgvtr by pressing the V.SEL button Selecting the Video SourceSelecting the BGTV, Bgvtr Select Video by pressing the Source but- tonPress the V.SEL button for 2 seconds Selecting the Picture to Rear DisplaySelect an option by moving the joystick up/down Adjusting the PictureOption Adjustment Select Picture by moving the joystick rightBasics Built-In TunerFM Tuner Function Menu Accessing the Tuner Function MenuOperation at the Function Menu Screen Exit from the Tuner Function MenuPGM button Local Seek TuningOperating Each Function Best Stations Memory BSMFunction name Display Press Hold for 2 seconds Recalling Preset Stations by Preset Frequency ListDisplay the Flip-Down Plate Press the Display buttonDisc Number Search Multi-DVD PlayerMulti-DVD Player Selecting the Multi-DVDDVD Function Menu DVD, Video CD Accessing the DVD Function Menu DVD, Video CDOperation at the Function Menu Screen DVD, Video CD Exit from the DVD Function Menu DVD, Video CDVideo CD Repeat PlayPause Check to see RPT is currently highlightedON/OFF PlayerDVD Function Menu CD Accessing the DVD Function Menu CDOperation at the Function Menu Screen CD Exit from the DVD Function Menu CDSelect Random by moving the joystick Random PlaySelect ITS by moving the joystick Scan PlayITS Play Select Scan by moving the joystickRepeat play RPT Mode Switch repeat range Random play Random Disc Title Input for CD and Video CD Selecting Discs by Disc Title List Disc Number Search for 6-Disc, 12-Disc types Multi-CD PlayerMulti-CD Player Selecting the Multi-CD PlayerAccessing the Multi-CD Function Menu Exit from the Multi-CD Function MenuMulti-CD Function Menu Display Play range Disc RDMMulti RDM Switch the Scan Play on by clicking the joy Stick Disc ScanMulti Scan Select COMP. by moving the joystick Compression and DBEPress the PGM button in the Multi-CD source Select the desired character type by pressing the button Disc Title InputGetting Text Displayed for CD Text compatible type Title Display SwitchingITS Programming ITS ITS Instant Track SelectionErase a Disc Program Erase a Track ProgramSelecting the TV Tuner Preset Memory and Direct RecallTV Tuner TV TunerAccessing the TV Tuner Function Menu Exit from the TV Tuner Function MenuTV Tuner Function Menu CD Player CD PlayerSelecting the CD Player Accessing the CD Function Menu Exit from the CD Player Function MenuCD Function Menu Audio Basic Adjusting Audio BasicAccessing the Audio Menu Exit from the Audio MenuCabin Equalizer Proper Setting for the In-car Acoustic CharacteristicsOperation at the Audio Setting Menu Adjusting Audio BasicBalance Adjustment Position SelectorAbout the Position Selector Select SP Setting by moving the joystick Adjustments for SpeakerOperation at the Speaker Setting Menu Cancel the FAD/BAL Setting Menu by clicking the joystickOFF/SMALL/LARGE Speakers SettingRepeat steps 3 7 for other speakers SMALL/LARGEWith EQ+ selected Same. AdjustingAudio BasicEqualizer Curve Select Equalizer by moving the joystickDisplay Source Source Level Adjustment SLAA similar manner, adjust the volume level of other sources Select SLA by moving the joystickSelect SFC by moving the joystick Select the desired SFC mode by moving the joystickSound Field Control SFC About the SFC functionSelect D. Range Control by moving the joy- stick Dynamic Range ControlDirect Control ON/OFF Remarks on Dolby PRO Logic ON/OFFSelect Loud by moving the joystick up Loudness AdjustmentBefore Getting Started Adjusting for the Speakers In UseAccessing the Speaker Setting Menu Fine Adjusting Audio ExpertSelect Test Tone by moving the joystick Adjusting the Speakers’ Output Levels using a Test ToneSelect Cross Over by moving the joystick Correcting the Subwoofer’s PhaseSelect SW Phase by moving the joystick Selecting a Crossover FrequencySelect Expert by moving the joystick Adjusting the Cabin Equalizer ExpertAccessing the Expert Setting Menu Tips for adjusting the Cabin EqualizerSelect a speaker by moving the joystick Operation at the Expert Setting MenuAdjusting 3-Band Parametric Equalizer Center FrequencyAdjusting the Speakers’ Output Level Option Adjustable RangeWIDE/NARROW Select Time a by moving the joystick down Adjusting the Time AlignmentSelect SP Level by moving the joystick To perform time alignmentSelect Custom Memo by moving the joy- stick Storing the Adjusted Cabin EQ into MemoryReset Adjusted Cabin EQ Select Cabin Reset by moving the joystickAdjusting the Equalizer Curves Select the band by clicking the joystickSelect Level, Frequency or Q Factor by Moving the joystick Adjust the selected option by moving the joy- stick up/down Accessing the Initial Settings Menu Exit from the Initial Settings MenuInitial Settings Menu Check to see FM is currently highlighted Changing the FM Tuning StepSetting the AM Tuning Step Changing the Initial SettingsSelect Sens by moving the joystick Setting the TimeSelect Adjust by moving the joystick Correcting Distorted SoundSelect Plate by moving the joystick Adjusting the Display PositionChanging the Pattern of Plate Select Disp Posi by moving the joystickSelect the desired Display by clicking the joy- stick Switching the Color of the Spectrum AnalyzerOther Functions Other FunctionsListening Sounds or Viewing Images from Additional Units Accessing the Set Up MenuSwitching the AUX Source Set Up MenuSelect Off by moving the joystick Switching the Video ModeSwitching the Speaker Input Mode Select the Video by pressing the Source buttonInput the Aux Title AUX Title InputMuting Function Cellular Telephone MutingGeneral TroubleshootingTroubleshooting Symptom Cause RemedyAudio/DSP General from previousAudio/DSP from previous DVD Player if installedTerms Installation Connecting the UnitsInstallation Mounting the Clamp Using the Corrugated TubeRouting the Optical Cable Insert the optical cable into the corrugated tubeLight green Connecting the Power CordLeft Connecting to a Sold Separately Power Amp Speaker Input Jack Connection Connecting the System a Front VideoOutput FM Modulator IP-BUS Main Unit IP-BUS AV Master Connecting the System B Dotted lines are not Video Input/Output Connection Mounting with Velcro Tape InstallationInstalling the Unit Mounting with BracketsAM tuner SpecificationsAmplifier FM tunerSpecifications Page Page Pioneer Corporation

AVM-P9000 specifications

The Pioneer AVM-P9000 is a high-performance multi-channel audio and video processor that has made significant waves in the world of home audio systems. Designed with the audio enthusiast in mind, this unit stands out for its exceptional audio quality, user-friendly interface, and extensive customization options.

At the core of the AVM-P9000 is its advanced digital signal processing technology, which ensures that audio playback is not only clearer but also more dynamic. The processor is capable of handling high-resolution audio formats, making it an excellent choice for audiophiles who demand the best in sound fidelity. With support for formats such as DTS-HD Master Audio and Dolby TrueHD, the AVM-P9000 can deliver a cinema-like experience right in the comfort of your own home.

One of the notable features of the AVM-P9000 is its ability to support multi-zone audio systems. This allows users to enjoy different audio sources in various rooms simultaneously. Whether you want to play classical music in the living room while streaming modern pop in the kitchen, the AVM-P9000 takes care of it with ease. Its multi-channel configuration also provides a powerful surround sound experience that can transform movie nights into breathtaking adventures.

The device is equipped with an intuitive interface that makes navigation a breeze. The layout is designed for simplicity, allowing users to adjust settings quickly without having to sift through complex menus. The AVM-P9000 also includes a customizable remote control, allowing users to personalize their listening experience further.

Connectivity is another strong suit of the AVM-P9000. It features a variety of inputs and outputs, including HDMI, optical, coaxial, and analog connections, enabling seamless integration with a wide array of components. For modern needs, it offers support for Bluetooth and Wi-Fi, allowing for wireless streaming from smartphones, tablets, and other digital devices.

In addition to its audio capabilities, the AVM-P9000 boasts a rich set of video processing features. It can upscale lower resolution content to near-4K quality, ensuring that even older films look stunning on high-definition displays. The built-in video switching capabilities also mean that users can connect multiple devices without the clutter of wires, simplifying the overall setup.

In summary, the Pioneer AVM-P9000 is a versatile and powerful audio and video processor that combines advanced technology with user-oriented features. Its exceptional audio quality, multi-zone capabilities, and extensive connectivity options make it a top choice for home entertainment systems. Whether you're a casual listener or a dedicated audiophile, the AVM-P9000 is designed to elevate your audio and video experience to new heights.
Top Page Image Contents