Pioneer VSX-409RDS Troubleshooting, Symptom Cause Remedy, FM broadcasts, AM broadcasts

Page 38

Additional Information

Troubleshooting

Incorrect operation is often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

Symptom

 

Cause

 

Remedy

The power does not turn on.

•

The power plug is disconnected.

• Connect the power plug to the

 

 

 

 

wall outlet.

 

•

The protection circuit may have

•

Disconnect the power plug from

 

 

activated.

 

the outlet, and insert again.

 

 

 

 

The unit does not respond when the

•

Static electricity caused by dry

• Disconnect the power plug from

buttons are pressed.

 

air.

 

the outlet, and insert again.

 

 

 

 

No sound is output when a function

•

Improper connections.

• Make sure the component is

is set.

 

 

 

connected correctly (see pages

 

 

 

 

7 through 11).

 

•

Sound is muted.

•

Press MUTING on the remote

 

 

 

 

control.

 

• The volume is turned down.

•

Adjust MASTER VOLUME.

 

• Speakers are turned off.

• Press SPEAKERS to switch on the

 

 

 

 

speakers.

 

•

Monitor is on.

• Press the MONITOR button.

 

 

 

 

No image is output when a function

•

Improper connections.

• Make sure the component is

is set.

 

 

 

connected correctly (see pages

 

 

 

 

7 through 11).

 

•

The input source is not properly

• Press the correct function button.

 

 

selected.

 

 

 

 

 

 

Considerable noise in radio broad-

•

Incorrect frequency.

• Tune in the correct frequency.

casts

•

The antenna is not connected.

• Connect the antenna (see page 7).

FM broadcasts

•The FM antenna is not fully extended or poorly positioned.

•Weak radio signal.

•Interfering radio waves causing distortion.

•Fully extend the FM wire antenna, position for best reception, and secure to a wall.

•Connect an outdoor FM antenna. (see page 7).

•Press RF ATT button.

AM broadcasts

•The AM antenna is poorly positioned.

•Weak radio signal.

•Interference cause by other equipment (fluorescent lamp, motor, etc.).

•Adjust the direction and position for best reception.

•Connect an additional internal or external AM antenna (see page 7).

•Turn off the equipment causing the noise or move it away from the receiver.

•Place the antenna farther away from the equipment causing the noise.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents VSX-409RDS Ventilation Information to UserTable of Contents Features Set up Checking the Supplied AccessoriesUsing this Manual Introductory InformationSpecial note on the remote control Preparing the Remote ControlOperating range of remote control unit Loading the batteriesUsing external antennas Connecting Your SystemConnecting Antennas Audio cords Connecting Audio ComponentsCassette deck placement Connecting DVD 5.1 Channel Components Connecting Video Components Audio/Video cordsConnecting Speakers Speaker terminalsHints on speaker placement View of speaker set upSwitch on the receiver Setting Up for Surround SoundSetting Up for Surround Sound Setting Up for Surround Sound Adjust the center CT speaker level with Level +/- buttons Setting up speaker levels for Dolby Pro LogicSetting up speaker levels for DVD 5.1 CH Press the Surround button Press the 2buttonSetting up speaker levels for DSP Press CH. Select again to move to the nextDisplays & Controls Front PanelDisplay Remote Control Press 2DOLBY PRO Logic on the receiver Listening in Dolby Pro Logic ModeListening in Surround Sound Press the Surround buttonListening in DVD 5.1 Channel Input Mode Use the Function button to select DVDUse the Effect +/- buttons to adjust Listening in DSP ModeSelect a DSP Mode DSP effect levelUsing the Tuner Finding a StationTuning Directly to a Station Press the Test Tone button to select either FM or AMTune to a station you want to memorize Press Station +/- to choose the preset Memory numberMemorizing Stations front panel only Press MemoryTo erase or change the station name Naming Memorized Stations front panel onlyPress Memory to input the first of the four Characters Stored Recalling Memorized StationsPress Class to select the class in which Station is stored Use the Function button to put the receiverAn Introduction to RDS & EON Receiver’s internal Program Identification function Using the RDS displayBasics of EON Searching for RDS Programmes front panel only Put the receiver in FM band by pressing FM/AM buttonAn EON-linked broadcast it will automatically Using EON search front panel onlyEON search has been set. If the receiver finds Jump to itPress the Function button to select a Source to record Making a RecordingMaking an Audio Recording Prepare the programme sourceMaking a Video Recording Load the DVD, LD, etcMD players only Controlling the Rest of Your SystemCD/MD/CD-R Player Controls Cassette Deck Controls DVD Player Controls Number buttonsTV VOL + TV ControlsTV FUNC. TV only FM broadcasts TroubleshootingSymptom Cause Remedy AM broadcastsAdditional Information Specifications VCR/DVR REC, CD-R/TAPE/MD REC

VSX-409RDS specifications

The Pioneer VSX-409RDS is a finely crafted audio/video receiver that exemplifies the brand's commitment to quality and user satisfaction. Released in the late 1990s, this receiver has remained popular among audiophiles and casual listeners alike, thanks to its solid performance and a robust set of features.

One of the key features of the VSX-409RDS is its powerful amplification capability. With a total power output of 100 watts per channel, this receiver is capable of driving a variety of speakers with ease. The four-channel configuration allows users to enjoy a true surround sound experience with compatible systems. Its ability to decouple sound from various input sources permits seamless integration and a dynamic listening experience.

In terms of connectivity, the VSX-409RDS comes fully equipped with multiple inputs, including dedicated RCA inputs for CDs and auxiliary equipment. It also features optical and coaxial digital inputs, ensuring high-quality audio playback from compatible devices. This versatility allows users to connect a variety of audio sources, including DVD players, gaming consoles, and even MP3 players.

The inclusion of the RDS (Radio Data System) functionality sets the Pioneer VSX-409RDS apart from many of its contemporaries. This technology grants users the ability to receive additional data transmitted alongside FM radio broadcasts, such as station names and song titles. This advancement enhances the radio listening experience, making it more engaging and informative.

The VSX-409RDS also incorporates Pioneer’s proprietary sound technologies, which include advanced DSP (Digital Signal Processing) capabilities, offering various sound modes such as Dolby Pro Logic and DTS compatibility. These features enhance the versatility of the receiver, allowing users to customize their audio experience for movies, music, or games. The built-in equalizer further fine-tunes the listening experience, accommodating personal preferences and room acoustics.

Another standout characteristic of the VSX-409RDS is its user-friendly interface. The intuitive layout and clear labeling simplify the operation, even for those new to home theater systems.

Overall, the Pioneer VSX-409RDS represents a harmonious blend of power, clarity, and connectivity, making it an excellent choice for anyone looking to enhance their home audio setup. Its enduring popularity speaks to its reliability and the quality that Pioneer consistently delivers.
Top Page Image Contents