Pioneer VSX-9140TXH, VSX-21TXH, VSX-23TXH, VSX-9040TXH manual Troubleshooting, Tel

Page 31

Troubleshooting

As you use the Advanced MCACC application, errors can occur for a variety of reasons, such as incompatibilities with other applications and the current configuration of your PC. If an error occurs, refer to the troubleshooting points below.

If the trouble cannot be rectified even after checking the points listed below, ask the Pioneer Customer Support Division (USA) or Customer Satisfaction Department (Canada).

Pioneer Electronics Service Inc.

Pioneer Electronics of Canada, Inc. Customer Satisfaction Department

TEL: 800-421-1404

TEL: 1-877-283-5901

The application is unstable, or does not work normally

Cause 1:

If your PC does not meet the requirements for using this application, the application can be unstable, very slow, or freeze up.

Check to be sure that your PC meets the requirements for using this application. (See page 2.) You cannot use this application unless your PC meets all of the requirements.

Cause 2:

Even if the required conditions for the computer environment are met, if many files are opened in the application and all are displayed with the MCACC Parameters option, an error message may appear due to lack of computer memory.

If an error message like the one shown below appears, either close some of the opened files, or quit the application itself then restart it. If you want to compare many files, we recommend printing them out using the Print function and comparing them on paper.

Not enough storage is available to process this command.

Advanced MCACC cannot be installed

Cause 1:

An error message may appear if there are not enough system resources available.

If an error message like the one shown below appears, re-start the PC, then start the installer (PioneerAdvancedMCACC_e_ver_*_*.exe) with no other applications active.

The InstallShield Engine (iKernel.exe) could not be installed.

The system cannot read from the specified device.

Cause 2:

Installation of Advanced MCACC may fail because of incompatibilities with other applications.

Try the following, in the order indicated.

1)If there are any other applications active, exit the other applications and try starting the installer (PioneerAdvancedMCACC_e_ver_*_*.exe) again.

2)If that does not work, try restarting your PC, and starting the installer (PioneerAdvancedMCACC_e_ver_*_*.exe) with no other applications active.

Continue

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Audio/video multi-channel receiver About the Advanced Mcacc Application Requirements for using the application on your PCMain features of the application About this manualThings you can accomplish with this application Double click the PioneerAdvancedMCACCever**.exe file Installing the ApplicationInput the Customer Information, then select Next Click Next Click Finish Choose InstallConnect the receiver to your PC with an RS-232C cable Operations on the Receiver and Cable ConnectionsOperations on the Receiver and Cable Connections Receiving measurement data Applications OperationsType of data Select the type of data to be received, then select OKGraph and parameter displays names and functions of parts Mcacc Parameters list display of Mcacc parameters Menu bar and menu icons Level dB Bar Graph To save measure data, choose Save from the File menu Saving graphs in data filesExiting the application Opening data filesSelect Exit from the File menu How to interpret reverb graphs Reverb How to Interpret the GraphsLevel dB Deciding the time period for Advanced EQ Setup calibrationContinue Case 1 Graph rises to right across all frequencies Checking steps to improve your room’s reverb characteristicsCase 4 a specific channel is slow to start Graph of reverb characteristics after calibration Graph of reverb characteristics before calibrationFor ALL CH ADJ For Symmetry or Front AlignParameters that can be displayed Display of the Mcacc parametersDisplays of the different memories Double click the new downloaded installer Updating, Deleting and Repairing the ApplicationUpdating the application Method 1 Delete from the Control Panel of the PC Deleting the applicationSelect Next Select Remove, then select Next Select Remove Click Finish Select Next Select Repair, then select Next Repairing the applicationModifying the application Select Install Click FinishTEL TroubleshootingCause Random transmission errors sometimes occur Advanced Mcacc cannot be updated Unplug the cable when not in use Pioneer Corporation
Related manuals
Manual 2 pages 38.99 Kb Manual 2 pages 13.6 Kb

VSX-9140TXH, VSX-9040TXH, VSX-23TXH, VSX-21TXH specifications

Pioneer has long been a frontrunner in the audio visual receiver market, and its VSX series is a testament to the brand's commitment to delivering high-quality home theater experiences. The VSX-21TXH, VSX-9040TXH, VSX-23TXH, and VSX-9140TXH are standout models that offer an impressive array of features, technologies, and characteristics.

Starting with the VSX-21TXH, this receiver showcases Pioneer’s ability to produce powerful, immersive sound. It provides a robust 7.1-channel surround sound configuration, which allows for full-bodied audio staging, making it perfect for both movies and music. The device is equipped with Dolby TrueHD and DTS-HD Master Audio technologies, ensuring high-definition sound quality. One of its notable features is the Integrated HDMI circuitry, which allows support for multiple HD sources while maintaining an elegant and clean setup.

Moving on to the VSX-9040TXH, this model elevates the audio experience with its advanced Class D3 amplification technology. This innovative design delivers high efficiency while minimizing power consumption. The VSX-9040TXH supports both wired and wireless surround sound setups, featuring built-in Wi-Fi and Bluetooth connectivity. This model is particularly user-friendly, boasting an intuitive GUI that enables easy navigation and setup.

The VSX-23TXH adds further functionality with its inclusion of multi-zone audio capabilities, allowing users to enjoy different audio sources in separate rooms simultaneously. This model also features advanced sound optimization technology, such as MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates audio settings based on the room’s acoustics to deliver the best sound quality.

Lastly, the VSX-9140TXH represents the pinnacle of the VSX series with its 9.2 channel surround sound. This receiver is designed for true audiophiles, delivering exceptional sound clarity and richness in all audio formats. It offers support for the latest surround formats, including Dolby Atmos and DTS:X, which enable immersive three-dimensional sound experiences. Additionally, the receiver features a high-resolution audio playback feature, supporting formats such as FLAC and DSD for those who crave studio-quality sound.

In summary, the Pioneer VSX-21TXH, VSX-9040TXH, VSX-23TXH, and VSX-9140TXH are remarkable audio video receivers, each capitalizing on cutting-edge technology and innovative features. They cater to various audio needs, making them ideal choices for anyone looking to enhance their home cinema or music environments. These models not only promise superior sound and user experience but also stand as a reflection of Pioneer’s dedication to audio excellence.
Top Page Image Contents