Shure M810E manual DIP Switches, SW702, = Limiter off, 15 dB

DIP SWITCHES

The rear-panel DIP switch provides the following setup options. The posi- tions shown in bold type are the factory settings.

NOTE: Switch positions and effects are shown in Figure 3 and also on the mixer label.

(MIXER

REAR

PANEL)

1 2 3 4 5 6 7

DIP

SWITCH

SW702

MODIFIABLE FUNCTION SWITCHES

FIGURE 3

DIP SWITCH SW702 FUNCTIONS

Switch	Manual/Auto	Last Mic	Hold Time	Off-Attenuation	Limiter	Link
Function		Lock-On		Level	Threshold	Local/Global
Switch Position	1	2	3	4	5,6	7
Number→
					5 Up
					= Limiter off
					6 Up
					5 Down
					= +8 dBm
					6 Up
Switch Up	Auto	On	0.4 second	15 dB	5 Up	Global
					= +16 dBm
					6 Down
					5 Down
					= +4 dBm
					6 Down
Switch Down	Manual	All mics off after	1.0 second	∞ (completely off)		Local
		hold time

Manual/Auto: Automatic activation is defeated in the Manual position. In Manual mode, functions as a standard 8x1 mixer.

Last Mic Lock-On:Last Mic Lock-On feature keeps the most recently ac- tivated microphone turned on until a newly activated microphone takes its place. When defeated, microphones turn off after their preset hold time.

Hold Time: Adjusts the time an activated microphone (which is not locked on) remains on after the talker stops talking. Settings are 0.4 seconds or 1.0 second.

Off-Attenuation:Changes the off-attenuation level from 15 dB to infinity (∞). With the 15 dB setting, an unused microphone is 15 dB lower in level than when it is activated. With the ∞ setting, an unused microphone is com- pletely off.

Limiter Threshold: Changes the output limiter threshold. Settings are OFF (factory setting), +16 dBm, +8 dBm, or +4 dBm (see Internal Modifica- tions for other threshold settings).

Link Global/Local: Determines whether each linked SCM810 output con- tains only its own program output, or that of all linked mixers (see Mixer Linking for more information).

5