Shure 810 specifications Speaker Specifications, Accessories, Replacement Parts, Mounting

SPEAKER SPECIFICATIONS

Frequency Response

500 to 5,000 Hz (see Figure 4)

Sensitivity (at 1,000 Hz)

116 dB SPL at 10 mm with 1 mW input

Impedance

16 Ω at 0.1 W, 1 kHz

Input Power

0.75W normal

1.5W maximum

1.552	2.661
[39.4]	[67.6]
1.125	Units = in. [mm]
	2.500
[28.6]	[63.5]

2.900

[73.7] 3.288

[83.5]

OVERALL DIMENSIONS

FIGURE 2

ACCESSORIES
Screwdriver	. . . . . . . . . . . . . . . . . . 80B498
REPLACEMENT PARTS
Grommet	. . . . . . . . . . . . . . . . . 66C346A
Earphone Jack Plug	. . . . . . . . . . . . . . . . . . 66C336
	R2
	5.1k

51

+

_

INTERNAL CONNECTIONS

FIGURE 5

MOUNTING

The 810 is provided with a 360° rotating spring clip on the rear case with positive detent stops every 45°.

+10

dB	0
	±10
			2	3	4 5 6 789	2	3	4 5 6 789
	20	50	100		1000			10000	20000

Hz

TYPICAL MICROPHONE FREQUENCY RESPONSE

FIGURE 3

	100
	90
dB	80
	70
	60

2	3	4	5	6 7 8 9	2	3	4	5	6 7 8 9
				1000					10000

Hz

TYPICAL SPEAKER FREQUENCY RESPONSE

FIGURE 4

NOTES:

1.ALL RESISTORS 1/4 WATT, 2%, UNLESS OTHERWISE SPECIFIED.

2.ELECTROLYTIC CAPACITORS SHOWN IN μF X VOLTS. NON-POLARIZED CAPACITORS IN μF, TOLERANCE10%, AND 50 V OR MORE UNLESS OTHERWISE SPECIFIED.

3.THE FOLLOWING SYMBOLS DENOTE:.

P.C. GROUND

CHASSIS GROUND

N/C

SHURE Incorporated Web Address: http://www.shure.com 222 Hartrey Avenue, Evanston, IL 60202±3696, U.S.A. Phone: 847-866±2200 Fax: 847-866-2279

In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414

In Asia, Phone: 852-2893-4290 Fax: 852-2893-4055

Elsewhere, Phone: 847-866±2200 Fax: 847-866-2585