Shure 450 Series II TRANSMIT/MONITOR Switch Conversion KIT, Specifications, Replacement Parts

Page 2

TRANSMIT/MONITOR SWITCH CONVERSION KIT

When the optional split-bar Transmit/Monitor Switch Conver- sion Kit is installed, the Monitor bar must be depressed before the Transmit switch can be depressed, requiring the operator to verify that the channel is open before transmitting. The Monitor bar can be locked in the “on” position. The Transmit bar is momentary and cannot be locked.

NOTE: Transceiver wiring information must be obtained from the transceiver schematic and/or the manufacturer.

SPECIFICATIONS

Type

Dynamic

Frequency Response

200 to 5,000 Hz (see Figure 2)

TYPICAL FREQUENCY RESPONSE

FIGURE 2

Polar Pattern

Omnidirectional

Impedance (at 1,000 Hz)

High Impedance: 30,000 Ω

Low Impedance: 225 Ω

Recommended Load Impedance

High Impedance: 100,000 Ω

Low Impedance: 1,000 Ω

Output Level (at 1,000 Hz, Open Circuit Voltage)

High Impedance

Low Impedance

–35.0 dBV/Pa*

–57.0 dBV/Pa*

(17.8 mV)

(1.4 mV)

*1 Pa = 94 dB SPL

 

Switches

Locking Press-to-Talk Switch: Activates microphone cir- cuit and an external relay or control circuit. The micro- phone circuit is normally shorted.

Impedance Selection Switch: Double-pole, double-throw slide switch located in the base of the microphone.

Cable

2.1m (7 ft.) four-conductor, two conductors shielded, non-detachable

Case

Two-tone gray ARMO-DURR

OVERALL DIMENSIONS

FIGURE 3

Net Weight

737 grams (1 lb., 10 oz.)

Shipping Weight

1020 grams (2 lb., 4 oz.)

Certification

Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Re- quirements (EN 50082–1, 1992).

REPLACEMENT PARTS

 

Cartridge

. . . R96

Cable

. C31C

On/Off Switch

RK141S

OPTIONAL ACCESSORIES

 

Transmit/Monitor Split-Bar Switch Kit

RK199S

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Image 2
Contents Shure Model 450 Series Paging and Dispatching Microphone Wiring ConnectionsPRESS-TO-TALK Switch Operation Impedance SelectionReplacement Parts TRANSMIT/MONITOR Switch Conversion KITSpecifications Optional Accessories