XT120R Three Channel Guitar Amplifier
The Rear Panel:
120 VAC: 250V
T3A
EXTENSION |
SPEAKER |
REVERB | CLEAN/SOLO/ |
| RHYTHM |
FOOTSWITCH | |
INSERT |
22 | 23 | 24 | 25 | 26 |
22:FUSE: The fuse protects the amplifier from damages caused by a faulty AC power source and/or other problems. If the fuse opens, replace it ONLY with the same size and type. If fuses continue to fail, check the AC source – if the source is okay, contact your Crate dealer for service information.
23:EXTENSION SPEAKER: Use this jack to connect the amplifier to an external speaker cabinet. This jack is wired in series with the internal speakers which remain active when an extension speaker is con- nected.
24:REVERB FOOTSWITCH: Use this jack to connect the 1/4” mono plug on the footswitch cable to the
25:CLEAN/SOLO/RHYTHM FOOTSWITCH: Use this jack to connect the 1/4” stereo plug on the footswitch cable to the
26:INSERT: Use this jack to connect an external effects device to the amplifier. Use Crate’s STP201, STP202, or STP203
27:AC LINE CORD (not shown): This grounded power cord is to be plugged into a grounded power out- let, wired to current electrical codes and compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.
to Insert | TIP |
| RETURN | TIP | to Insert |
jack | RING |
| SEND | RING | jack |
| SLEEVE GROUND | SLEEVE |
| ||
(STP201, 3' |
|
|
| (YPP117) |
|
STP202, 6' |
|
|
|
| |
STP203, 9') |
|
|
|
|
|
|
|
|
| T | R I |
|
|
|
| I P | N G |
T |
| R I |
|
|
|
I P |
| N G |
| ||
|
|
|
| ||
|
|
|
| MONO CABLES) | |
to | to |
|
| to | to |
effect | effect |
|
| effect | effect |
"OUT" | "IN" |
|
| "OUT" | "IN" |
jack | jack |
|
| jack | jack |
External Effect |
|
| External Effect | ||
5