Crate Amplifiers manual RFX200S Technical Specifications

RFX200S Three-Channel Guitar Amplifier with Stereo DSP

RFX200S TECHNICAL SPECIFICATIONS:

Output Power Rating		70W per channel @5% THD, 8 ohm load
		100W per channel @5% THD, 4 ohm load
Speaker Size and Rating		(2) Celestion Seventy 80W 12” 8 ohm
Input Impedance		470kΩ
Total System Gain	Ch 1	74dB, all controls @10
	Ch 2	88dB, all controls @10
	Ch 3	103dB, all controls @10
Maximum Input Signal Accepted		5 volts peak-to-peak
Channel 1	Low Control	26dB range @ 70Hz
	Mid Control	10dB range @ 900Hz
	High Control	20dB range @ 10kHz
Channel 2	Low Control	26dB range @ 70Hz
	Mid Control	10dB range @ 900Hz
	High Control	20dB range @ 10kHz
Channel 3	Low Control	17dB range @ 100Hz
	Mid Control	16dB range @ 1kHz
	High Control	12dB range @ 7kHz
Power Requirements		120 VAC, 60Hz, 95VA
		100/115VAC, 50/60Hz, 95VA;
		230VAC, 50/60Hz, 95VA
Size and Weight		21” H 27-3/4” W x 11-1/4” D, 45 lbs.

The RFX200S is covered with a durable Tolex material: wipe it clean with a lint-free cloth.

Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

www.crateamps.com

@2005 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133

47-387-02 • 083105