Pioneer XRB3089-A manual Additional information, Symptom Remedy

Page 68

12Additional information

Problem

Remedy

Considerable noise in radio

• Connect the antenna (page 19) and adjust the position for best reception.

broadcasts.

• Route any loose cables away from the antenna terminals and wires.

 

• Fully extend the FM wire antenna, position for best reception, and secure to a wall

 

(or connect an outdoor FM antenna).

 

• Connect an additional internal or external AM antenna (page 19).

 

• Turn off equipment causing interference or move it away from the receiver (or

 

move antennas farther away from equipment causing noise).

 

 

Broadcast stations cannot be

• Connect an outdoor antenna (refer to page 19).

selected automatically.

 

Noise during playback of a cassette deck.

• Move the cassette deck away from your receiver, until the noise disappears.

Sound is produced from other components, but not from LD or DVD player.

•Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG according to the type of connections made (refer to page 36).

•Set the digital input settings correctly (refer to page 64).

•Make digital connections (refer to page 12) and set the SIGNAL SELECT to DIGITAL (refer to page 36).

•Refer to the instruction manual supplied with the DVD player.

No sound is output or a noise is output when software with DTS is played back.

•Set the digital volume level of the player to full, or to the neutral position.

•Make sure the player’s settings are correct and/or the DTS signal out is on. Refer to the instruction manual supplied with the DVD player.

•Set the input signal type to DIGITAL (see Choosing the input signal on page 36).

During a playback search, noise is output from a DTS compatible CD player.

•This is not a malfunction, but be sure to turn the volume down to prevent the output of loud noise from your speakers.

Everything seems to be set up

• Check that the positive/negative speaker terminals on the receiver are matched

correctly, but the playback

with the corresponding terminals on the speakers (see Connecting the speakers on

sound is odd.

page 20).

 

 

There seems to be a time lag

• See Automatically setting up for surround sound (MCACC) on page 8 to set up your

between the speakers and the

system again using MCACC (this will automatically compensate for a delay in the

output of the subwoofer.

subwoofer output).

 

 

After using the Auto MCACC

• Low-frequency noise could have been caused by an air conditioner or motor.

Setup, the speaker size setting

Switch off all appliances in the room and rerun the Auto MCACC Setup.

(LARGE or SMALL) is incorrect.

 

 

 

Can’t operate the remote

• Replace the batteries (refer to page 6).

control.

• Operate within 7 m (23 ft.), 30° of the remote sensor (refer to page 29).

 

• Remove the obstacle or operate from another position.

 

• Avoid exposing the remote sensor on the front panel to direct light.

 

• VSX-918V model only: Unplug anything connected to the CONTROL IN jack and

 

use remote normally (see Operating other Pioneer components on page 49).

 

 

VSX-918V model only: The SR

• Reinsert the SR cable, making sure it’s connected to the right jack (see Using this

cable is connected, but the

receiver with a Pioneer plasma display on page 62).

connected components can’t

• Make sure an analog connection has been made between the units.

be operated with the remote.

• This feature only works with Pioneer products.

 

 

The display is dark or off.

• Press DIMMER on the control repeatedly to return to the default.

 

 

HDMI

Symptom

Remedy

No picture or sound.

• If the problem still persists when connecting your HDMI component directly to

 

your monitor, please consult the component or monitor manual or contact the

 

manufacturer for support.

 

 

68

En

Page 67 Page 69
Image 68
Page 67 Page 69
Contents VSX-918V VSX-818V Wash hands after handling Ventilation Caution Operating EnvironmentContents Other Settings Troubleshooting Hdmi Important information regardingControlling the rest of your system Other connectionsBefore you start Before you start ChapterChecking what’s in the box Loading the batteriesMinute guide Minute guide ChapterIntroduction to home theater Listening to Surround SoundSwitch on the receiver and your TV 02 5 minute guideMinute guide Follow the instructions on-screenWait for the test tones to finish Make sure ‘OK’ is selected, then pressPress Phase Phase Control to switch on phase correction Better sound using Phase ControlOther problems when using the Auto Mcacc Setup Making cable connections Connecting upConnecting up Chapter Connecting up Connecting a DVD player and TV ReceiverConnecting up Connecting the multichannel analog outputsAudio and Video inputs on this receiver.2 DeutschConnecting up Connecting other audio components About the WMA9 Pro decoderConnecting an HDD/DVD recorder, VCR and other video sources Connections for the VSX-818V are the sameComponent 1 DVD Component 2 TV Component 3 DVR Connecting up Using the component video jacksConnecting using Hdmi About Hdmi AC outlet Connecting up Connecting to the front panel audio mini jackConnecting to the front panel video terminal Connecting up Connecting antennas Using external antennasTo improve FM reception To improve AM receptionConnecting up Connecting the speakers VSX-918VHints on speaker placement Bare wire connectionsTwist exposed wire strands together Tighten terminalSpeaker placement diagrams Switching the speaker systemControls and displays Controls and displays ChapterFront panel 14 15 16Controls and displays DisplayAnalog DTSPRO Logic VIR. SBControls and displays Remote control Master Volume + SetupLevel + AV ParameterAccess Signal SELTuner Disp ClassOperating range of remote control Listening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Advanced surround effects Press ADV Surr repeatedly to select a listening modeListening to your system Listening in stereoUsing the Sound Retriever Listening to your system Using Front Stage Surround AdvanceUsing Stream Direct Using Virtual Surround Back VSB What it does Options Listening to your system Setting the AV optionsSetting Setting What it does Options CH1Choosing the input signal Press Portable SHIFT+iPod on the remote controlListening to your system Playing other sources Selecting the front audio inputsSystem Setup menu System Setup menu ChapterUsing the System Setup menu Manual Mcacc speaker setupSystem Setup menu Select ‘Manual MCACC’ from the System Setup menuSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu Fine Channel LevelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceAcoustic Calibration EQ Setting the Acoustic Calibration EQ automaticallyCopying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ manually Select the channels you want and adjust to your likingSelect ‘OK’ to copy and confirm Might distort. If this happens, bringChecking your Acoustic Calibration EQ settings Manual speaker setupSpeaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menu Crossover NetworkSelect ‘Crossover Network’ from the Manual SP Setup menu Adjust the level of each channel usingSelect ‘Channel Level’ from the Manual SP Setup menu Select a setup optionSpeaker Distance Select ‘Speaker Distance’ from the Manual SP Setup menuAdjust the distance of each speaker Using Using the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Listening to station presetsNaming station presets Nederlands EspañolMaking an audio or a video recording Making recordingsMaking recordings Chapter Setting the remote to control other components Controlling the rest of your systemControlling the rest of your system Chapter Operating other Pioneer componentsDirect function Clearing all the remote control settingsUse the number buttons to enter the preset code Shift + Controlling the rest of your system Controls for TVsButtons Function Components Function Components SHIFT+Controlling the rest of your system DVD Recorder Controlling the rest of your system Preset Code ListOn digital STB Connecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterOther connections IPod playbackFinding what you want to play Basic playback controlsUsing XM Radio Connecting your XM Radio receiverSwitching the iPod controls1 Press iPod Ctrl to switch the iPod controls.2Using XM HD Surround Saving channel presetsListening to XM Radio Selecting channels and browsing by genreAbout XM Using the XM MenuAbout Neural Surround Using Sirius Radio Connecting your Sirius Connect TunerListening to Sirius Radio Select the channel you want to memorizeOne at time with Enter to listen to the Sirius radio broadcastUsing the Sirius Menu Parental Lock Use and Enter toUsing the SR+ mode with a Pioneer plasma display Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsAssigning the Hdmi inputs Other SettingsAssigning the component video inputs Other Settings Other Setup menu SR+ Setup for Pioneer plasma displaysSelect ‘Other Setup’ then press Enter Select the ‘PDP Volume Control’ setting you wantTroubleshooting Problem RemedyAdditional information Additional information ChapterSymptom Remedy Additional informationConfiguration1 Important information regarding the Hdmi connectionSymptom Cause Symptom Cause ActionIPod messages XM radio messagesSirius radio messages TunerAdditional information Resetting the main unit Switching the speaker impedanceSpecifications Amplifier sectionVideo Section Component video sectionFM Tuner Section AM Tuner SectionWe Want You Listening For a Lifetime Power cord cautionCleaning the unit Limitedwarranty Pioneer Corporation

XRB3089-A specifications

The Pioneer XRB3089-A is a remarkable advancement in the world of automotive audio systems, designed to enhance the driving experience through high-performance sound and smart technologies. This unit merges cutting-edge engineering with user-friendly features, making it a sought-after option for audiophiles and casual listeners alike.

One of the main features of the XRB3089-A is its high power output, delivering a robust audio performance which ensures that every track sounds vivid and clear, whether it's played at low or high volumes. The amplifier built within this system allows for up to 50 watts of continuous power output per channel, providing an impressive boost to the overall listening experience. This feature is complemented by its four-channel architecture, which ensures that sound is evenly distributed across the vehicle.

The sound quality of the XRB3089-A benefits greatly from its advanced equalization options. Users can customize their soundscapes through a user-friendly interface that includes adjustable bass, treble, and midrange settings. This level of control allows each listener to tailor their audio experience to their liking, ensuring that whatever the genre, the details of the music are never lost.

Another innovative feature of the XRB3089-A is its seamless connectivity. It supports various streaming services via Bluetooth, enabling wireless audio streaming from smartphones and other compatible devices. Additionally, it comes equipped with USB input, allowing users to enjoy their favorite playlists directly from a flash drive. The built-in auxiliary port enhances connectivity options even further, catering to a wider range of media playback.

The XRB3089-A's design is both functional and aesthetically pleasing. With an intuitive interface and backlit controls, users can easily navigate through their audio options even in low-light conditions. Its modern look can complement any vehicle interior, making it a stylish upgrade for car owners looking to enhance their car's audio setup.

Furthermore, the Pioneer XRB3089-A incorporates sound technology such as high-pass and low-pass filters, contributing to optimized audio performance. These features help in managing frequency responses, ensuring clarity and fullness in sound, while minimizing distortion.

In summary, the Pioneer XRB3089-A represents a synthesis of power, clarity, and advanced connectivity, making it an excellent choice for drivers seeking an enhanced in-car audio experience. With its user-centric design and high-performance characteristics, it stands as a definitive choice in the competitive market of automotive audio systems.
Top Page Image Contents