Pioneer manual Sound Modes, Standard mode, Home THX Cinema mode, Mpeg mode VSX-D938TX only

Page 39

Basic Playback

Sound Modes

The six sound modes on the VSX-D938TX (The five sound modes on the VSX-D908TX/D908TX-G) are explained here. These can be turned on from the front panel or from the remote control.

There are four (VSX-D938TX) or three (VSX-D908TX/D908TX-G) cinema modes: STANDARD, MPEG (VSX- D938TX only), HOME THX CINEMA, and ADVANCED THEATER. These are designed to be used with multi channel surround sound audio/visual sources (like DVDs and LDs). Intrinsic to home theater, these modes can deliver realistic and powerful surround sound that recreates the movie theater experience. You may need to experiment with them to see which settings suit your home system and personal tastes.

The DSP and STEREO modes are designed to be used with music sources but some DSP modes are also suited for film soundtracks. Again, try different settings with various soundtracks to see which you like.

You must choose one of the three cinema modes or the DSP mode in order to get surround sound. In STEREO mode, only the front two speakers are used.

STANDARD mode

This mode is for pure decoding of Dolby Digital, DTS and Dolby Pro Logic. No special effects are added. It is good for enjoying movies that have been recorded in Dolby Digital, DTS or Surround.

HOME THX CINEMA mode

THX is a set of technical standards created by Lucasfilm, Ltd. These standards were designed to emulate a film sound stage and thus reproduce, with the greatest possible accuracy, the soundtrack intended by the filmmakers.

For more detailed information, see P.78.

MPEG mode (VSX-D938TX only)

Use this mode to enjoy playback of software recorded in MPEG audio.

ADVANCED THEATER modes

The Advanced Theater mode is a newly designed system for enhancing movie soundtracks and other audio- visual sources. It incorporates the use of DTS (Digital Theater System) as well as Dolby Digital into its sound processing. These functions switch on automatically when the source you are playing is encoded with DTS, Dolby Pro Logic or Dolby Digital (bearing the 1logo). There are four Advanced Theater settings that use DSP (Digital Signal Processing) to create different types of sound environments.

MUSICAL

This mode is primarily for music and adds a spacious feeling to the sound. A long delay time of reflected sounds, provides resonant tones which emulate a concert hall.

DRAMA (CINEMA)

This mode is designed for movies with a lot of dialog. The elements of dialog are enhanced, making the characters seem more real. The mode also compresses the dynamic range somewhat so loud sounds do not overpower softer ones (compare this with the MIDNIGHT LISTENING mode explained on p.46).

ACTION

This mode is designed for action movies, which generally use lots of sound effects. The mode enriches the sound to make it more realistic and extends the parameters to pick up high and low sound effects.

5-D THEATER

This mode is especially designed to give sound depth to stereo sources. The overall effect builds a dynamic and broad sound space, allowing two-channel (stereo) signals to faithfully imitate a five speaker sound. The mode should be used in conjunction with Dolby Pro Logic for sources bearing the 3mark.

When a Dolby Digital soundtrack is played back, the Dialog Normalization function of the receiver activates automatically. Dialog Normalization is a Dolby Digital function that establishes the average dialog level for the program source being played. If the receiver’s level does not match the average dialog level, first you see “DIAL. NORM” flash in the receiver’s display and next OFFSET + 4 dB (as an example) will appear. The number +4 dB is the difference between the receiver’s gain structure and the Dolby Digital average dialog level. To match the average dialog level, subtract or add the OFFSET level. For example, if the OFFSET level is +4 dB, the amplifier’s output is 4 dB over the average recorded

level.

39

OPERATION

Page 38 Page 40
Image 39
Page 38 Page 40
Contents VSX-D938TXVSX-D908TXVSX-D908TX-G Ventilation Information to UserFM 50 kHz, AM 9 kHz Channel Step Setting VSX-D908TX/D908TX-G onlyTWO Voltage Selector Switches VSX-D908TX/ D908TX-G only FM 100 kHz, AM 10 kHzFeatures Table of Contents Opening the Front Panel Checking the Supplied AccessoriesHow to Use This Manual Before You StartPreparing the Remote Control Loading the batteriesAA drycell batteries AA IEC LR6 × Audio cords Connecting Your EquipmentCassette deck placement Audio ComponentsVideo Components FrontAudio/Video cords Digital Connections Digital audio cords/Optical cablesDigital audio cord Optical cable Or standard video cord DVD/LD player Or LD player Example of connection using a DVD/LD or LD playerVSX-D938TX model VSX-D908TX/D908TX-G modelsComponents equipped with 5.1 channel analog output jacks External Decoder InputTo improve FM reception Using external antennasAntennas AM loop antennaRear Speakers Powered sub wooferSpeakers Front Speakers aWhile holding down the Speakers button First turn the receiver off, then press the power buttonSpeaker impedance Speaker terminalsSub Woofer Speaker placementFront Center RightUnswitched 100 W MAX Connecting Additional AmplifiersPower Connections AC Outlets Switched Total 100 W MAXDisplay Displays and Controls@ H.P headphones indicator Program Format indicator= Tuner indicators Speaker indicatorsFront Panel VSX-D938TX = Master Volume Display See p.18 Remote sensor Master VolumePress to switch the receiver on or into Standby mode Front Panel VSX-D908TX/D908TX-G~ Direct button @ Midnight Mode button See p.46$ Signal Select button See p.42 = External Decoder in button See p.47Remote Control Signal Select button System Setup buttonRemote Setup button # Master Volume buttonLoudness Surround Sound Set UpSwitching video system between PAL and Ntsc On Screen DisplayTurn on the receiver and your TV Setting Up for Surround SoundPress System Setup button System Setup Menu appears on your TV screenGo on to the next page to continue set up Speaker setting Select Speaker Setting with the 5´ buttonsPress Enter SUB Woofer default setting is YES Front default setting is LargeCenter default setting is Large Surround default setting is LargeNext, proceed to Channel Level below Channel delayDefault setting is 3.0 m If you want to change a setting before proceedingManual manual Test Tone Select aTEST Tone modeChannel level Auto automatic Test ToneTo exit before outputting the Test Tone Auto modeManu mode If you are using a Sound Pressure Level SPL meterSelect Exit to return to the System Setup Menu Crossover networkSpecify the crossover frequency for your small speakers Select Setting Start and press Enter Bass peak level managerPress Enter to return to the previous screen Range control Choose a Digital in and assign it an input function Digital-in selectStandby Basic PlaybackPlaying Sources with Stereo Sound On the receiverSound Modes Standard modeHome THX Cinema mode Mpeg mode VSX-D938TX onlyJazz Stereo modeDSP modes HallSelecting a Sound Mode Select the sound modeSurrround operation Playing Sources with Dolby Digital or DTS Sound Using Mpeg audio discs VSX-D938TX only Analog Switching ANALOG/DIGITAL signal inputAuto Analog AC-3 RF Digital Analog DigitalReducing noise during playback Digital NR function Midnight Listening in Midnight Listening modeEach press switches Midnight Listening mode on or off Press MidnightExternal Decorder External decoder playback front panel only96kHz/24bit performance VSX-D938TX Press External DecorderListening in Loudness mode front panel only Adjusting bass and treble tone control front panel onlyDirect playback front panel only Adjusting the brightness of the display front panel only Press FL DimmerFL Dimmer VSX-D938TX Using the Tuner Automatic and Manual TuningMPX mode Direct Access Tuning Press Memory to activate the memory function Using the front panelMemorizing Frequently Used Stations Tune in the desired stationTo skip through each channel in order Using the remote controlRecalling Memorized Stations Use the number buttons to select the channel you wantPress Remote Setup Remote Control of Other ComponentsSetting Up the Remote Control to Control Other Components Recalling preset codesPress 5´ repeatedly to display the name Press Remote Setup to exit the Preset Recall Setup modePress Multi Control for the component you want To controlTo cancel Learning Setup mode Press Multi Control for the component you want to controlSelected button continues to blink To program additional operations for the current component Press Remote Setup to exit the Learning SetupPress the button to be programmed ModeEnter Side A/B Remote Controlling Other ComponentsDVD or LD player operations SourceVCR and DVD video recorder operations Channel -/+ENTERTV/VCR Disc CD player operationsDisc DISP/CHARA You can also use this button when selecting trackAllows you to change the display mode MD operationsMenu STB Satellite Tuner operationsGuide ExitEnter STB DTV operationsDTV Menu DTV ON/OFFUse to select a TV channel TV operations´7´3´8´1 BLUE/GREEN/RED YellowCassette deck operations Using Other Functions Recording from Audio ComponentsRecord monitor Tape 2 Monitor Button on the front panel and choose Digital Signal Select to digitalRecording from Digital Audio Components Prepare the source you want to record and setFirst, decide the component you would like to record Put the receiver in that function. Set the SignalOr AC-3 RF VSX-D938TX only signals is not possible Recording from Video ComponentsMulti Operation To cancel Multi Operation Setup modeMulti Operations Press Function that you want to use to startPress Remote Setup to exit the Multi Operation Setup mode Press Multi Operation on the remote controlPerforming multi operations System OFF Using the system off buttonSetting Up the Direct Function Press and hold both Remote Setup Remote back lightOFF MID MAX Erasing the multi operations Resetting the Remote ControlErasing all signals learned and preset codes Erasing the learned remote control commandsComparison with Dolby Pro Logic Surround Techno Tidbits and Problem-solvingDolby Digital Laser disc formatSurround Dolby DigitalDTS Dolby Pro LogicMpeg Audio VSX-D938TX only THXPreset Code List VSX-D938TXDevice Manufacturer Code Portland VCR PerdioTape Yamaha PhonolaGEC FormentiProtech Schneider FujitsuSonolor NEISonoko NikkaiVSX-D908TX/D908TX-G AM broadcasts TroubleshootingSymptom Cause Remedy FM broadcastsSymptomCause Specifications VCR 1 REC, VCR 2 REC, MD/TAPE 1 REC, Tape 2 REC VSX-D938TX Taiwan model/D908TX/ D908TX-G99E00EF0P00 Power cord Caution

VSX-D908TX, VSX-D908TX-G, VSX-D938TX specifications

The Pioneer VSX-D908TX, VSX-D938TX, and VSX-D908TX-G are notable entries in the realm of audio-video receivers, offering a range of advanced features and technologies that cater to both audiophiles and home theater enthusiasts. Each model encapsulates Pioneer’s commitment to audio excellence and cutting-edge technology.

The VSX-D908TX stands out with its robust power handling capabilities, delivering multiple channels of amplification for immersive sound experiences. With a power rating of 100 watts per channel across 5 channels, users can enjoy rich, detailed audio whether they're watching movies or listening to music. This model also incorporates Dolby Digital and DTS decoding, allowing for detailed surround sound reproduction. The onboard Room Calibration system helps tailor the audio output to suit the unique acoustics of any room, enhancing the listener's experience.

The VSX-D938TX takes this foundation further by providing an impressive 110 watts per channel across 7 channels. This allows for even greater sound staging, making it an excellent choice for those looking to build a more expansive home theater system. In addition, it boasts advanced video processing features, including support for various video formats and the capability to upscale standard-definition content, ensuring that viewers can enjoy their favorite shows and movies in the best possible quality. Its connectivity options further enhance versatility, offering multiple HDMI inputs, component, and composite video connections.

The VSX-D908TX-G shares many features with its counterparts but introduces a sleek, modern aesthetic that appeals to contemporary users. Its user-friendly interface is complemented by a comprehensive remote control that simplifies navigation through settings and inputs, making the overall experience comfortable and intuitive.

All three models embody Pioneer’s proprietary technologies, including Advanced Convergence technology, which enhances image clarity and reduces artifacts in digital content. Additionally, they support various audio formats like MP3, WMA, and AAC, ensuring compatibility with a range of digital sources.

Ultimately, the Pioneer VSX-D908TX, VSX-D938TX, and VSX-D908TX-G cater to a diverse audience, providing robust power, advanced decoding capabilities, and user-friendly features, making them formidable additions to any home entertainment setup. These receivers not only enrich the listening experience but also align seamlessly with modern home theater demands.
Top Page Image Contents