GTD120/212 Guitar Amplifier w/DSP and Channel Tracking
The DSP Section
Normal Signal Path
Chorus > Delay > Reverb
Echo/Eff Signal Path
Delay > Chorus > Reverb
19 20 21
19.REVERB: Use this control to adjust the amount of digital reverb effect. In its fully counterclockwise position, the signal will be “dry” (without reverb). As you rotate this control clockwise, the amount of reverb increases.
20.CHORUS: Use this control to select the type of digital chorus effect. In its fully coun- terclockwise position, the signal will be “dry” (without chorus). As you rotate the control clockwise, you can select from three chorus
settings, three flanger settings, or three phaser settings. The chart below describes these effects.
21.DELAY: Use this control to select the type of digital delay effect. In its fully counterclockwise position, the signal will be “dry” (without chorus). As you rotate the control clockwise, you can select from three slap settings, three echo settings, or three echo with effect settings. The chart below describes these effects.
Effect Setting | Description |
|
Chorus 1 | Chorus with low depth |
|
Chorus 2 | Chorus with medium depth |
|
Chorus 3 | Chorus with high depth |
|
Flanger 1 | Flanger with low depth |
|
Flanger 2 | Flanger with medium depth |
|
Flanger 3 | Flanger with high depth |
|
Phaser 1 | Phaser with low feedback |
|
Phaser 2 | Phaser with medium feedback |
|
Phaser 3 | Phaser with high feedback |
|
Slap 1 | Single delay with low level |
|
Slap 2 | Single delay with medium level |
|
Slap 3 | Single delay with high level |
|
Echo 1 | Echo with low level |
|
Echo 2 | Echo with medium level |
|
Echo 3 | Echo with high level |
|
Echo/Eff 1 | Echo with low level before effect |
|
Echo/Eff 2 | Echo with medium level before effect |
|
Echo/Eff 3 | Echo with high level before effect |
|
|
| 7 |
|
|