XK100 Keyboard Amplifier

17 18

19 20

		15
14
21	22	23
		23

9.INPUT: Use this 1/4” jack to connect a keyboard or other line level signal to the corresponding chan- nel by means of a shielded instrument cable.

10.EQUALIZATION: Use this five-band graphic equalizer to shape the output of the amplifier to best suit your tastes and to compensate for room acoustics.

11.REVERB RETURN: Use this control to adjust the overall amount of reverberation applied to the output signal. This control works in conjunction with each channel’s Rev/Eff control (#5).

12.LEVEL: Use this control to adjust the overall output level of the amplifier.

13.EFFECTS RETURN: Use this control to adjust the amount of external effect (if used) from the Patch Bay Send and Return (#17, 18). This control works in conjunction with each channel’s Rev/Eff control (#5).

14.LINE OUT / HEADPHONES LEVEL: Use this control to adjust the level of the signal at the Bal. Line Out jack (#21) and the (headphones) jack (#22). This control functions independently from the Master Level control (#12).

15.ON: This LED illuminates when the amplifier is turned on.

16.(POWER): Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed).

17.SEND: Use this jack to send a signal from the amplifier to an external effects device. The signal at this jack is pre-EQ for reduced noise.

18.RETURN: Use this jack to return a signal to the amplifier from an external effects device. The amount of effect applied from the Send and Return jacks to the signal is governed by the Effects Return control (#13).