Crate Amplifiers VTX65 manual Using the Footswitch for More Presets, Left jack

VTX65 Three-Channel Guitar Amplifier with Advanced DSP

Using the Footswitch for More Presets:

The Crate three-button footswitch supplied with the VTX65 allows access to an addi- tional DSP preset for each channel of the amplifier. When the footswitch is connected to the amplifier as shown below, the “original” DSP presets are active for each channel when the #3 footswitch LED is illuminated. These are referred to as “DSP Bank ‘A’.” When the #3 button is switched and the LED is out, a second DSP preset may be stored and recalled for each channel - “DSP Bank ‘B’.”

NOTE: DSP Bank “B” presets are only accessible when the footswitch is connected to the amplifier. When the footswitch is not connected, only DSP Bank “A” is accessable.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

"LEFT" jack "RIGHT" jack

1 2 3

Switch #1:	Switch #2:	Switch #3:
LED on = SOLO CH.	LED on = SOLO/	LED on = DSP
LED off = RHTYHM CH.	RHYTHM CH.	BANK "A"
Only when Switch #2	LED off = CLEAN	LED off = DSP
is activated (LED lit)!	CH.	BANK "B"	9