Crate Amplifiers BV-60H, BV-129H manual Introduction, Features, Musician Made in the U.S.A

Page 3

BV-60H /BV-120HAll Tube Guitar Amplifiers

Introduction:

The BV-60H/120H are all-tube, feature-packed professional stage performers' amplifiers. Rugged con- struction, reliable American craftsmanship and two powerful channels of pure tube power are some of the trademarks of these new and impressive pieces of musician's equipment. Both amplifiers feature two dis- tinctly different 12AX7 tube-driven channels: one with classic tube rhythm sounds and one offering you some of the finest lead and overdrive sounds of any stock amplifier.

Each channel features an all-tube preamp section with separate reverb level controls and three bands of equalization for total tone control. The master Presence control lets you custom tailor the sound of your gui- tar to suit your particular needs. The effects loop can be quickly bypassed via the front panel switch or an optional footswitch and features a switchable “pad” for use with either floor pedals or rack-mounted effects.

The Line Out signal is tapped directly from the speaker outputs, then attenuated and frequency-compen- sated to replicate the sound of a miked speaker cabinet. Dual speaker jacks and an impedance selector switch allow the use of multiple cabinets totalling 8 or 16 ohms. The BV-60H packs a solid 50 watts of out- put power; the 120H a whopping 100 watts.

Features:

Here's a quick overview of the BV-60H/120H's features and controls. Additional information can be found on the pages indicated.

•All-Tube Preamp and Power Amp: Classic tube sounds with Crate’s legendary performance and reliability.

•Two Completely Separate Channels: Independent level, tone and reverb controls (page 4).

•Presence Control: Provides even greater tone control and flexibility by allowing you to vary the upper harmonics of your guitar (page 4).

•Footswitch Control: Remote channel selection and Effects Loop On/Off is available through the use of an optional two-button footswitch (such as Crate’s CFP-2) (page 5).

•Switchable Effects Loop with Pad: Footswitch or front panel button controlled, the external effects loop can be switched in or out with ease. A switchable pad provides optimum performance from line-level rack mounted effects as well as floor-dwelling foot pedals (pages 4,5).

•Impedance Selector Switch: Proper impedance matching is essential for optimum performance and life expectancy of a tube amplifier. These amps allow the use of 8 or 16 ohm speaker config- urations (page 5).

•Line Out Jack: Taken directly from the speaker output jacks, the Line Out signal is frequency compensated to sound like a “miked” speaker cabinet. Use this jack to connect to the house mix- ing board, a recording console or another performer’s powered monitor (page 5).

•DC Filament Supply: The first preamp tube has a DC filament supply for reduced hum.

•High Cosmetic Appeal and Stage Presence: The unique cosmetics of the BV-60H/120H serve as a tribute to your good taste in musical equipment.

•Musician Made in the U.S.A.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents BV-60H / BV-120H All Tube Guitar Amplifiers Congratulations ContentsFeatures IntroductionMusician Made in the U.S.A Channel Front PanelRear Panel Tube Types And Usage Brief History Of The TubeImportance Of Proper Biasing Nature Of Tubes Why And When To Replace ThemSurvival Tips For Tube Amplifiers Crunchy Edge Sparkling Clean Some Suggested SettingsSystem Block Diagram BV-60H /BV-120HAll Tube Guitar Amplifiers Declaration Of Conformity Technical Specifications

BV-129H, BV-60H specifications

Crate Amplifiers has long been a respected name in the world of music amplification, and their BV-60H and BV-129H models exemplify the brand's commitment to quality, performance, and innovative technology. Designed with both amateur and professional musicians in mind, these amplifiers bring powerful sound and versatility to any stage or studio environment.

The BV-60H is a compact, high-performance guitar amplifier head that boasts a wattage of 60 watts. It is perfect for players seeking a balance between power and portability. One of the standout features of the BV-60H is its all-tube design, which provides warm, rich tones that are highly sought after by guitarists. Additionally, the amp includes multiple channels, allowing musicians to switch between clean and overdriven sounds easily. Its built-in reverb adds depth to the overall tonal palette, making it an excellent choice for genres ranging from blues to rock.

On the other hand, the BV-129H amplifies the sound experience with an impressive 120 watts of power. This amplifier head is designed for musicians who need serious volume and punch in their performances. The BV-129H offers a more extensive range of tonal controls, with an emphasis on shaping the midrange frequencies, making it a fantastic choice for lead guitarists who want to stand out in a mix. Its unique EQ controls enable artists to tailor their sound to their specific style, whether they prefer a smooth bluesy tone or a sharp, aggressive crunch.

Both models feature durable construction, ensuring they can withstand the rigors of touring and frequent use. The design includes a robust chassis and high-quality components that not only enhance performance but also extend the lifespan of the amplifiers.

Furthermore, Crate Amplifiers incorporates advanced circuit technology in both models, providing superior sound quality and reliability. This technology minimizes noise and enhances signal integrity, ensuring that musicians can deliver their best performance without interference.

In summary, the Crate BV-60H and BV-129H amplifiers are exceptional choices for musicians seeking power, versatility, and unique tonal capabilities. With their robust features, advanced technologies, and durable designs, these amplifiers stand as a testament to Crate Amplifiers' dedication to quality and performance, making them valuable tools for any guitarist's arsenal.
Top Page Image Contents