Crate Amplifiers BV-120HR manual Technical Specifications

Page 8

BV-120HRRED VOODOO All Tube Guitar Amplifier

Technical Specifications:

Output Power Rating

 

100 watts RMS @ 5% THD 8 or 16 ohm load, 120 VAC

 

 

 

Gain

Channel 1

66dB, tones at “10” @ 1kHz

 

Channel 2

96dB, tones @ “10” @ 1kHz

 

 

 

Tone Control Range

 

 

 

Channel 1

 

 

Low

16dB @ 100Hz

 

Mid

20dB @ 300Hz

 

High

10dB @ 10kHz

 

Channel 2

 

 

Low

16dB @ 100Hz

 

Mid

11dB @ 650Hz

 

High

16dB @ 10kHz

 

Presence

5dB @ 10kHz

 

 

 

Input Impedance

 

1M ohm

 

 

Maximum Signal Accepted

2.8V peak to peak

 

 

 

Tube Types

 

 

 

Preamp

12AX7A (3)

 

Power Amp

12AX7A (1), 6L6GT/5881 (4)

 

 

 

Line Out Level

 

1.2V RMS nominal

 

 

 

Power Requirements

 

120VAC, 60Hz, 180VA

 

 

100/115VAC, 50/60Hz, 180VA

 

 

230VAC, 50/60Hz, 180VA

 

 

 

Size and Weight

 

12”H x 30.25”W x 10”D, 50lbs.

 

 

 

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.

The BV-120HR is covered with high-quality, durable red Tolex® . To keep the cabinet looking its best, avoid

abrasive cleansers. Wipe the cabinet clean using a slightly dampened soft cloth. Do not spray cleaners directly into the amplifier. Never use harsh cleaners on the hardware since they could damage their protective coatings.

www.crateamps.com

©1999 SLM ELECTRONICS A division of St. Louis Music 1400 Ferguson Avenue St. Louis, Mo 63133

P/N 47-631-05 • 06/99

Image 8
Contents Page Contents CongratulationsFeatures IntroductionFront Panel ChannelRear Panel Watts RMS Loop Main EXT Line OUT Return SendSome Suggested Settings Sammys SoundsSystem Block Diagram Word About TubesTechnical Specifications