Extron electronic manual HDMI DA2 Application Diagram, Extron HDMI DA2, Distribution Amplier

Page 8
HDMI DA2 Application Diagram

Output Compatibility Correction — The HDMI DA2 monitors the EDID of each connected display to ensure it is compatible with the current input signal. The following adjustments are made for each output independently:

zz Interface format: If the connected display is DVI and the input signal is HDMI, the signal is reformatted to DVI. If the output is HDMI and the input is DVI, no reformatting is needed because HDMI is backwards compatible with DVI.

zz Video color bit depth: If the connected output device does not support the color bit depth of the input signal, it is truncated down to the next level that is supported (12‑bit > 10-bit > 8-bit). The signal can be forced to always truncate to 8-bit via Simple Instruction Set (SIS) commands, disabling deep color.

zz Audio: If the connected output device does not support the audio format of the input signal, audio is muted.

NOTE: These adjustments do not affect the actual video or audio data (there is no video scaling or audio decoding or mixing). It is up to the user or installer to ensure that the connected display device is compatible with the video resolution of the input signal.

Easy mounting options —­ The HDMI DA2 is a quarter rack wide, 1 inch high, and 3 inches deep, which allows the unit to be conveniently mounted in a rack or under furniture.

HDMI DA2 Application Diagram

TouchLink

Control

System

TCP/IP

Extron

HDMI DA2

Distribution

Ampli￿er

 

 

TE

 

REMO

 

RS

-232

 

 

 

 

G

2

Tx

Rx

1

OUTPUTS

 

POWER

 

12V MAX

T

0.4A

 

INPU

HDMI Cables

Extron RS-232

HD Display

HD Display

Blu-ray Disc Player

Figure 1. HDMI DA2 Application Diagram

HDMI DA2 • Introduction

2

Image 8
Contents HDMI DA2 User GuideHDMI Distribution AmplifierSafety Instructions Safety Instructions EnglishInstructions de sécurité Français Sicherheitsanweisungen DeutschTrademarks FCC Class A NoticeCopyright Specifications Availability Software CommandsConventions Used in this Guide NotificationsContents SIS CommandsOperation Updating FirmwareHDMI DA2 • Contents HDMI DA2 Features IntroductionAbout the HDMI DA2 zz About the HDMI DA2 zz HDMI DA2 FeaturesDistribution Amplier HDMI DA2 Application DiagramExtron HDMI DA2 Installation Installation OverviewRear Panel Features A B C DConnecting the Power Supply Connecting the Input Source Connecting the Output DisplaysWiring for RS-232Control Optional Figure 3. Wiring the HDMI DA2 for RS-232ControlConnecting to the USB Port HDMI DA2 InstallationFigure 6. Installing the Software Automatically HDMI DA2 Installation HDMI DA2 Front Panel Features Power Status LEDUSB Config Port OperationSignal Status LEDs EDID LEDInput Signal LED Output Signal LEDsUser Assigned Mode EDID MinderAutomatic Mode HDMI DA2 Memory Locations ResolutionResolution NativeFootnotes for the EDID table see page SIS Commands Introduction to SISzz Symbols Used in this Guide zz Command and Response Table for SIS CommandsSymbols Used in this Guide Error MessagesCommand and Response Table for SIS Commands 60-997-01 EZXXXzz Loading the Firmware to the HDMI DA2 Downloading and Installing Firmware LoaderUpdating Firmware Downloading HDMI DA2 Firmware Figure 9. Firmware Link on the Download TabLoading the Firmware to the HDMI DA2 Figure 10. Opening Firmware LoaderHDMI DA2 Updating Firmware HDMI DA2 Updating Firmware HDMI DA2 Updating Firmware Desktop Placement Rack Mounting ProcedureMounting Rack MountingExtron Warranty
Related manuals
Manual 2 pages 36.04 Kb

HDMI DA2 specifications

The Extron Electronics HDMI DA2 is a high-performance distribution amplifier designed to deliver pristine HDMI signals to multiple display devices. Ideal for a variety of applications, including classrooms, conference rooms, and control centers, this device ensures that high-definition video and audio are flawlessly transmitted without degradation over distance.

One of the standout features of the HDMI DA2 is its ability to support resolutions up to 4K at 60Hz, enabling it to handle the most demanding video content. With its advanced signal processing capabilities, the DA2 ensures that the integrity of the signal is maintained, allowing for crystal-clear images and sound.

The DA2 is equipped with two HDMI outputs, allowing users to distribute a single HDMI source to two different displays simultaneously. Each output is capable of driving long cable runs—up to 50 feet for 4K signals—thanks to its robust signal amplification technology. This is especially beneficial in larger environments where displays may be located at significant distances from the source.

For added convenience, the Extron HDMI DA2 features EDID (Extended Display Identification Data) management, which allows the device to communicate effectively with connected displays. This ensures that the source and display can agree on the optimal video settings, enhancing compatibility and performance across diverse equipment.

Another notable characteristic is the automatic input switching feature, which allows the device to seamlessly switch between multiple HDMI sources if used in conjunction with other Extron products. This is particularly useful in situations where multiple devices may need to be accessed without the hassle of manual intervention.

The HDMI DA2 is also designed with ease of use in mind. It includes LED indicators that provide users with real-time feedback on power, input selection, and signal status. This streamlined approach helps in quickly diagnosing any issues that may arise during operation.

In terms of installation, the DA2 is compact and rack-mountable, making it a versatile choice for any AV system setup. With its rugged build quality and reliability, the Extron HDMI DA2 is tailored for professionals who demand high performance and dependability from their audio-visual equipment. Overall, this HDMI distribution amplifier is a critical component for any AV system requiring superior signal management for multiple displays.