BT-350 ThunderBass Amplifier
Technical Specifications:
Output Power Rating | 350 watts @ 0.2% THD, 4 ohm load – 120VAC |
| 200 watts @ 0.2% THD, 8 ohm load – 120VAC |
|
|
Gain @ 1kHz | 61dB, tones at “5” |
|
|
Tone Control Range |
|
Low Boost | +8dB @ 20Hz |
Low | ±13dB @ 40Hz |
Mid | ±11dB @ 260Hz |
High | ±15dB @ 5kHz |
High Boost | +10dB @ 10kHz |
|
|
Graphic EQ Level | +8dB, |
|
|
Graphic EQ Range | ±12dB @ 40Hz, 100Hz, 250Hz, 625Hz, 1.6kHz, 4kHz, 10kHz |
|
|
Signal to Noise Ratio | 84dB typical |
|
|
Input Impedance | 0dB input: 1M ohm |
| |
|
|
Maximum Signal Level Accepted | 0dB input: 2.5V peak to peak |
| |
|
|
Tube Type: | 12AX7 (preamp) |
|
|
Effects Loop Level | 1V RMS for full power output |
|
|
Power Requirements |
|
Domestic | 120VAC, 60 Hz, 10A |
Export | 240VAC, 50 Hz, 5A |
|
|
Size and Weight | 5.25”H x 19”W x 15.75”D, 36 lbs. |
|
|
CRATE continually develops new products, as well as improves existing ones. For this reason,
specifications and information in this manual are subject to change without notice.
CRATE/SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON AVENUE, ST. LOUIS, MO 63133 |