Cm-Sb, Speciﬁcations | Crown Audio CM-SB instruction

CM-SB

he Crown® CM-SB is a stereo bar or T stereo mic mount. This handy device

mounts two CM-700 mics on top of a single mic stand for coincident and near-co- incident stereo miking. The bar has two studs that slide and tighten in place. Other mics with ¾" (1.905 cm) diameter handles can be used as well.

Positioning the Microphones

1. Thread the bar onto a 5/8"-27 mic stand.

2. Get two mic swivel mounts (such as the

Crown ASA-4) or two CM-SM isolation shock

mounts. Thread the mounts onto the studs.

One stud is longer than the other so that the

Stereo bar shown with two CM-700 microphones and two CM-SM shock mounts (mics and shock mounts not included)

two mics won’t interfere with each other.

3. Using the supplied stereo miking tem-

plate, adjust the angle and spacing between

the mics for the desired stereo effect. To do

this, slide the studs in the bar, rotate the mic

mounts, and slide the mics fore-and-aft in

the mic mounts. Be sure the studs are placed

symmetrically on either side of center. Num-

bered position marks are on the bar to help

you do this.

4. Lock the studs in position by threading

them tightly into the mic mount or into the

supplied 5/8"-27 nut.

Here are some stereo mic techniques that can be used with the stereo bar:

Coincident pair (XY): This technique is mono-compatible. Angle the mics inward so their grilles are aligned vertically, and angle them 90 degrees to 135 degrees apart. An angle of 90 degrees gives a narrow stereo spread unless the musical ensemble sur- rounds the mics in a semicircle. An angle of 135 degrees gives a wider stereo spread, but may have some off-axis coloration.

Near-coincident pair: Angle the mics outward and space their grilles a few inches apart horizontally. In the O.R.T.F. stereo mic technique, the mics are angled 110 degrees apart (55 degrees either side of center) and are spaced 7 inches (17 cm) apart. This tech- nique tends to provide accurate localization and sharp imaging. Another technique is the N.O.S. method: angle the mics 90 degrees

apart and space the grilles 1 foot apart. This method has less off-axis coloration than the O.R.T.F. method but less-sharp imaging. A 90°/8" setup works as well.

Angle the mics down slightly so they will aim at the musical ensemble when raised. Raise the mic pair on a boom stand (typically about 14 feet high for an orchestra). Place the mic stand about 5 to 20 feet from the front row of musicians. Find a miking distance where you monitor the desired amount of hall ambience. Close miking sounds close; distant miking sounds distant. A suggested equalization is +3 dB at 80 Hz, –2 dB at 5 kHz and +2 dB at 12 kHz. This EQ compensates for distant miking and off-axis placement.

Architects’ and Engineers’ Speciﬁcations

The product shall be the Crown CM-SB or equivalent. It shall be a stereo bar for mount- ing two matched microphones on a single microphone stand for coincident and near-co- incident stereo miking. The bar shall have two studs that can be slid and tightened in place. These studs shall thread into a standard 5/8"- 27 microphone swivel mount or shock mount. The studs shall be held captive by nylon wash- ers. Positioning marks shall be provided on the bar. The Crown CM-SB is speciﬁed.

Speciﬁcations

Materials: Aluminum bar and studs, nylon washers.

Dimensions: 7 1/8 in. x 1 1/2 in. x 1/8 in. (18 cm x 3.8 cm x 0.3 cm).

Weight: 3.2 ounces (90.7 grams).

Included accessories: Template for stereo mic positioning.

Optional Crown Products and Accessories:

CM-700MPmatched pair cardioid condenser mics

CM-SMisolation shock mounts ASA-4swivel mounts

PH-1Aphantom power supply

Crown International, Inc. 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 TEL: 574-294-8000 FAX: 574-294-8FAX www.crownaudio.com

© 2005 Crown Audio®, Inc. Speciﬁcations subject to change without prior notice,. Latest informa- tion available at www.crownaudio.com. Crown and Crown Audio are registered trademarks of Crown International, Inc.

5/05	130722-1A

CM-SB specifications

Crown Audio has long been a respected name in the world of professional audio equipment, and the CM-SB microphone exemplifies their commitment to producing high-quality sound solutions. Designed primarily for broadcast, studio, and live applications, the CM-SB offers a blend of cutting-edge technology and user-friendly features tailored for both professionals and enthusiasts.

One of the standout features of the CM-SB is its condenser microphone design, which is essential for capturing audio with exceptional clarity and detail. Condenser microphones are known for their wide frequency response and sensitivity, making them ideal for vocal recordings, instrument amplification, and more nuanced sound applications. The CM-SB is engineered to capture the full range of the audio spectrum, from the lowest lows to the highest highs, ensuring a faithful reproduction of your sound.

The CM-SB is equipped with a cardioid polar pattern, which is instrumental in isolating sound sources while minimizing background noise. This directional pickup pattern helps to focus on the intended sound source, making it an excellent choice for live performances and studio recordings where unwanted ambient noise can be an issue. This selectivity also contributes to a cleaner mix, allowing vocalists or instrumentals to shine without interference from other sounds in the environment.

In terms of build quality, the CM-SB is robust and designed to withstand the rigors of professional use. Its durable construction means it can handle the demands of touring and live events, ensuring reliability under various conditions. Moreover, the mic features internal shock mounting, which helps to reduce handling noise and vibrations, further enhancing the purity of the captured sound.

Another critical aspect of the CM-SB is its versatility. It comes with a range of compatible accessories, including windscreens and pop filters, which provide additional options for optimizing sound quality in different environments. This flexibility allows users to adapt the microphone to their specific needs, whether they are in a studio setting or performing live on stage.

In summary, the Crown Audio CM-SB microphone combines cutting-edge condenser technology, a focused cardioid pickup pattern, and rugged durability to deliver outstanding audio performance. Its versatility makes it a suitable choice for a wide range of applications, reaffirming Crown Audio's reputation for excellence in the professional audio marketplace. Whether for broadcast, studio work, or live events, the CM-SB is a reliable tool for achieving exceptional sound quality.