XDMA6630 OPERATION
Bluetooth® Operation
Overview
The XDMA6630 supports the HFP
Preparation
Before you can use a mobile device with this head unit, it must be paired and connected. Please make sure that Bluetooth is activated on your mobile device before you begin the pairing process. Refer to the owner's manual of your mobile device for more details.
Bluetooth Pairing
1)To pair a Bluetooth enabled mobile phone to your head unit, change to Bluetooth mode by pressing 
on the head unit or press MODE until
2)Press and hold 
on the head unit for 5 seconds, until "PAIRING" is displayed, the Bluetooth icon will flash every second. The head unit will begin to broadcast the pairing signal for 90 seconds.
3)Complete the pairing from the Bluetooth menu of your mobile device by searching
for new devices. Please refer to your mobile device instructions for further information on Bluetooth pairing and connections. The Bluetooth icon will illuminate solid when connected.
The BTM60 device name is "DUAL_BT"
The Bluetooth passcode "1234"
Connecting a mobile device
• If the
• From Bluetooth standby mode, press and hold 
to disconnect your mobile device.
• If your mobile device becomes disconnected, press from Bluetooth standby mode to reconnect your mobile device.
•To connect a previously paired mobile device:
1)Disconnect any mobile devices by pressing and holding 
for 5 seconds.
2)Press SELECT. "DEVICE NAME" will appear on the LCD.
2)Turn the volume knob to cycle through the list of devices 1 through 8.
3)Press 
to connect to the desired device. It must be in range to connect.
Note: When a device number is selected, i will take a few moments for the device name to appear on the bottom line of the LCD.
Compatibility
•Due to the differences in Bluetooth technology, some mobile devices may be incompatible or function improperly when used with the XDMA6630.
22