Electro-Voice 635N/D-B Frequency Response, Architects’ and Engineers’, Specifications

Frequency Response: Wiring Diagram:

Architects’ and Engineers’	Dimension Drawing:
Specifications:

The microphone shall be an omni directional dynamic type with wide-range response uniform from 80 to 13,000 Hz. It shall have a nonmetallic diaphragm and an internal pop filter and magnetic shield to prevent dust and magnetic particles from reaching the diaphragm. The impedance shall be such that the microphone will match 50-, 150- and 250ohm inputs. The line shall be balanced to ground and phased. The output level shall be 2.8 mV/pascal. The magnetic circuit shall be nonwelded and employ a neodymium alloy magnet. The microphone shall have a maximum diameter of 36 mm (1.42 in.), a length of 148 mm (5.84 in.) and a weight of 170 g (6 oz). Finish shall be nonreflecting fawn beige (635N/D) or semi gloss black (635N/ D-B). The microphone shall have a built-in XLR-type connector, and shall include a 5/8”-27 thread stand adapter. The Electro-Voice 635N/D and 635N/D-B are specified.

635N/D Part Number:

• 6352332

635N/D-B Part Number:

• 6352333

12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 3/2006

Part Number 534671 Rev B

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321 For technical assistance, contact Technical Support at:

800/392-3497 or 952/736-4656 Specifications subject to change without notice.