Available Accessories, ULM20, CS200EX, CO2EX

MS3000 OWNERS MANUAL

Weight:2.06 lb/1.06 kg

Power Output:	10 mW terminated, 50-mW maximum
Antenna:	Internal (patented)
Modulation:	FM, +40 kHz Deviation w/50 us pre-emphasis
Frequency Response:	50 Hz to 15,000 Hz
Transducer:	Electro-Voice N/D767 Supercardioid (MSHD)
	Electro-Voice BK-1 Cardioid Electret (MSHC)
Supplied Accessory:	Stand adapter
Battery:	9 volt alkaline
Approvals:	FCC, Part 74H
	Industry Canada RSS123
FCC Identification:	B5DH211
Size:	10.75 in long (27.3 cm) x 2 in (5.08 cm) max.
Weight (MSHD)	284 g (10 oz) without battery
Weight (MSHC)	246 g (9.6 oz) without battery
MSB Bodypack Transmitter
Power Output:	10 mW terminated, 50-mW maximum
Antenna:	Permanently attached
Modulation:	FM, +40 kHz Deviation w/50 us pre-emphasis
TA4F Connector:	Pin 1: Ground; Pin 2: Mic Input;
	Pin 3: +5 volt bias; Pin 4: +5 volt bias fed through a 3 K
	ohm resistor for 2-wire electrets
Frequency Response:	50 Hz to 15,000 Hz
Microphone Input Sensitivity:	7.8 mV for full deviation
DC Power:	9 volt alkaline battery
Approvals:	FCC, Part 74H
	Industry Canada RSS123
FCC Identification:	B5DB108A
Size (HxWxD):	4.5 in x 2.6 in x 1.25 in (no antenna)
	(114.3 cm x 66 cm x 31.75 cm)
Weight:	3.5 oz (480 grams) without battery
	Figure 13—TA-4F Connector Wiring
	Pin 1 = ground
	Pin 2 = mic input
	Pin 3 = +5 volt bias
	Pin 4 = +5 volt bias fed through 3K resistor for 2-wire
	electrets

Figure 13

AVAILABLE ACCESSORIES
Model	Part #	Description
ULM20	ULM20	Electro-Voice cardioid lavalier microphone
CS200EX		Electro-Voice cardioid lavalier microphone
CO2EX		Electro-Voice omnidirectional lavalier
CM-311	E3K	Crown differoid headset microphone
HM2		Electro-Voice cardioid headset microphone
HM1		Electro-Voice cardioid headset microphone
	879155	ULM20 windscreen

page 8

Figure 13—TA-4F Connector Wiring