Operation, Specifications | ClearOne comm AccuMic II manual

Operation

Specifications

Using the AccuMic II

The AccuMic II is a plug-and-play microphone; the only function that is controlled manually is Mute. Press the Mute button (on top of the mic pad) to mute the AccuMic II’s mics; press Mute again to unmute the mics.

When using two connected AccuMic IIs, pressing the Mute button on either unit mutes/unmutes both AccuMic II mic pads.

The AccuMic II uses three LEDs that indicate the direction your voice is com- ing from, letting you know you’re being heard at the distant site.

Troubleshooting

If you have trouble with your AccuMic II, the unit might not be set up properly or other equipment might be malfunctioning. To begin, check the following:

•The AccuMic II power supply is plugged into a 120/240-volt electrical outlet.

•The base connector cable from the power supply to the AccuMic II is securely connected.

•Connections to the video codec and television are secure.

•The equipment the other party is using is comparable in quality to your video conferencing system and is working properly.

•The LEDs on the top of the AccuMic II illuminate in the direction of the par- ticipant speaking. Participants need to be within 10 feet of the

AccuMic II.

If problems persist, please contact our Technical Services Group.

Dimensions (L/W/H)

8" x 6.5" x 1"

20.3 x 16.5 x 2.5 cm

Weight

1 lb/.45 kg

Operation

Temperature: 5–40° C/ 41–104° F

Humidity: 50–80%

Storage

Temperature: 5–70° C/ 41–158° F

Humidity: 10–90%

Power

12VDC, 2A, 25W, center

positive

Microphone Out

RCA jack

Nominal level: -10dBu

Impedance: 100Ω

Speaker Reference In

RCA plug

Nominal level: -10dBu

Impedance: 200kΩ

Speaker Reference Out

RCA jack

Nominal level -10dBu

Cable

(1)35' (10.7 m) 10-pin mini-DIN to four-way break- out cable adapter:

1 Power In 12VDC, 2A,

25W

1 Microphone Out

1 Speaker Reference In

1 Speaker Reference Out

Microphones

3 elements, each with 120-

degree pickup range

Visual Feedback Indication

3 LEDs that indicate direc- tion of audio pickup

Mute Button

Mutes all mic elements

A/D Conversion

24 bit, 16kHz

Frequency Response

50Hz–7kHz

AEC Tail Time

130ms

Noise Cancellation

6dB attenuation

Auto Mixer and Input

Configuration

Automatic gating control PA adaptive mode Adaptive ambient mode Echo cancellation Noise cancellation First mic priority

NOM

Regulatory and Standards

FCC, CE, IC

Optional AccuMic II Extension Mic

Includes AccuMic II micro- phone and 10' (3 meter) extension cable.

Kit part number: 910-156- 117.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760