specifications
VLP 102 Pendant Microphone
Microphone Element
Type | Omnidirectional electret condenser |
Gain |
Audio input
Number/signal type | 1 mono, via integrated electret condenser |
| microphone or mic input jack |
| 1 stereo, unbalanced |
Connectors | (1) 3.5 mm mini audio jack for auxiliary |
| line input |
| (1) 2.5 mm mini audio jack for auxiliary |
| mic input |
IR transmitter (microphone transmission)
Signal type | Infrared output |
Carrier frequencies | 2.3 MHz and 2.8 MHz, selectable |
General
Power | Supplied by internal batteries or an external |
| power supply |
Charging jack | (1) 3.8 mm o.d. DC power jack, center pin |
| positive |
Batteries |
|
Number/type | 1 AA size NiMH, NiCd, or alkaline battery |
Operating time (h:mm) | Rechargeable 2500 mAh NiMH batteries: |
| 8 hours |
Recharging time | 5.5 hours for a 2500 mAh NiMH battery |
Regulatory compliance |
|
Environmental | RoHS, WEEE |
Accessibility | Section 508 of the Rehabilitation Act |
| (29 U.S.C. 794d) |
Warranty | 3 years parts and labor |
VLR 102, VLR 102SR Receivers
Audio input
Number/signal type |
|
VLR 102 | 1 infrared from VLP 102 microphones |
| 1 stereo, unbalanced |
| 1 mono, balanced |
VLR 102SR | 1 infrared from VLP 102 microphones |
Connectors |
|
VLR 102 | (1) 3.5 mm captive screw connector, 3 pole, |
| for aux/mix input |
| (1) |
VLR 102SR | (1) |
Audio output
Number/signal type........................ 1 mono, balanced, line level, (1)
IR sensor
Signal type | Infrared input |
Reception area | 1600 square feet (148.6 square meters) |
Reception angles | 360° horizontal, 60° vertical Control/ |
| remote Receiver, (VLR 102 only) |
Serial control port | 1 |
| 3 pole |
Contact closure | (1) 3.5 mm captive screw connector, 3 pole |
General
Power input requirements | +12 VDC, 0.25 A |
Cooling | Convection, no vents |
Mounting | Ceiling or wall with included hardware |
Regulatory compliance |
|
Safety | CE, |
EMI/EMC | CE, |
Environmental | RoHS, WEEE |
Warranty | 3 years parts and labor |
VLC 102 CHARGING STATION
General
External power supply | 100 VAC to 130 VAC, 50/60 Hz, external; |
| 2 prong; to 5 VDC, 1 A, regulated 3.5 mm |
| o.d. jack |
Power input requirements | 5 VDC, 0.5 A |
Regulatory compliance |
|
Safety | CE, CUL, |
EMI/EMC | CE, |
Environmental | Complies with the appropriate requirements |
| of Energy Star® (Energy Star qualified power |
| supply, efficiency level IV), RoHS, WEEE. |
Warranty | 3 years parts and labor |
Specifications are subject to change without notice.
Model | Version Description | Part Number |
VLM 1000 | Single Pendant with Wall Charger | |
VLM 2000 | Two Pendants with Charging Station | |
|
|
|