Pioneer VSX-1018AH-K 7 Hdmi Control, Synchronized amp mode, Before using synchronization

Page 66

09HDMI Control

1Press RECEIVER, then press the SETUP button.

2Select ‘Other Setup’, then press ENTER.

3Select ‘HDMI Control Setup’ from the Other Setup menu.

7.Other Setup

 

7d.HDMI Control

Setup

 

a . Multi

Channel In Setup

 

HDMI Control

 

 

 

 

 

OFF

 

b . ZONE Audio Setup

 

 

 

 

 

 

c . SR+

Setup

 

 

 

 

 

 

d . HDMI Control Setup

 

 

 

 

 

 

 

e . OSD

Adjustment

 

 

 

 

 

 

 

 

:Return

 

 

 

:Finish

4Select the ‘HDMI Control’ setting you want.

•ON – Enables the HDMI Control function. When this receiver’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the flat panel TV.1

•OFF – The HDMI Control is disabled. Synchronized operations cannot be used. When this receiver’s power is turned off, audio and video of sources connected via HDMI are not output.

5When you’re finished, press SETUP.

You will finish to System Setup menu.

Synchronized amp mode

Synchronized amp mode begins once you carry out an operation for the flat panel TV. For more information, see the operating manual of your flat panel TV.

Synchronized amp mode operations

By connecting a component to this receiver with an HDMI cable you can use synchronized amp mode, which

allows you to synchronize the following operations2:

•Displays on the flat panel TV when you mute or adjust the volume of this receiver.

•The input of this receiver is automatically changed when playback occurs on a connected component.

•Even if you change this receiver’s input to a device that is not connected by HDMI, the synchronized amp mode remains in effect.

•This receiver’s input switches automatically when the channel is switched on an HDMI control-compatible flat panel TV.

•By pressing GENRE when listening to a source from a HDD/DVD recorder, the most appropriate listening mode is automatically selected (see Using the genre synchronizing function on page 35 for more on this).

Before using synchronization

Once you have finished all connections and settings, you must:

1Put all components into standby mode.

2Turn the power on for all components, with the power for the flat panel TV being turned on last.

Canceling synchronized amp mode

Operate the flat panel TV to cancel the synchronized amp mode.

If you cancel synchronized amp mode while connected via HDMI to a flat panel TV or while you are watching a TV programme, the power for this receiver is turned off.

3Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.

4Check whether the components connected to all HDMI inputs are properly displayed.

About HDMI Control

•Connect the flat panel TV directly to this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

•Only connect components you intend to use as a source to the HDMI input of this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

Note

1• When HDMI Control is set to ON, the audio/video signals input at the HDMI IN terminals are output at the HDMI OUT terminal even when this receiver is switched off.

• With HDMI Control set to ON, Input Setup and HDMI Input are automatically set to OFF.

2The linked mode remains in effect even when this receiver’s input is switched to something other than HDMI.

66

En

Page 65 Page 67
Image 66
Page 65 Page 67
Contents VSX-1018AH-K Model Number VSX-1018AH-K Responsible Party Name Operating EnvironmentFederal Communications Commission Declaration of Conformity Keep in a Secure AREA. this is for Your SecurityRisk of Electric Shock Do not Open Wash hands after handling Contents Other connections Other SettingsUsing other functions Hdmi ControlFeatures Before you startBefore you start Chapter Checking what’s in the box Installing the receiverBefore you start Loading the batteriesIntroduction to home theater Minute guideMinute guide Chapter Listening to Surround SoundFollow the instructions on-screen Playing a source Problems when using the Auto Mcacc SetupMinute guide Select the input source you want to playPhase Control OFF Better sound using Phase ControlPhase Control on Phase Control indicator on the front panel lightsConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment Connecting your equipment When making cable connections About the video converterConnecting your equipment Connecting using Hdmi About HdmiConnect using a standard video cable Connecting your equipment Connecting your TV and DVD playerConnecting your Blu-ray disc player Connect using an Hdmi cableFor a second recorder, use the DVR2 in inputs Use an optical cable for the connection.2 Using the component video jacksConnecting digital audio sources Use a three-way component video cableAbout the WMA9 Pro decoder Connecting analog audio sourcesConnecting a component to the front panel inputs Use a coaxial cable for the connectionConnecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersBanana plug connections Connecting antennas Connecting external antennasConnecting your equipment Plugging in the receiver Plug the power cord into a power outletFront panel Controls and displaysControls and displays Chapter 13 14Operating range of remote control unit Controls and displaysSpeakers Controls and displays Display Controls and displays Remote control RECEIVERMute TV CtrlSOURCE ReceiverAuto playback Listening to your systemListening to your system Chapter Listening in surround soundListening in stereo Using the Advanced surround effectsListening to your system Pro Logic IIx Music SeeListening to your system Using Front Stage Surround Advance Using Stream DirectSelecting Mcacc presets Choosing the input signal Using surround back channel processingHdmi Digital Analog Pro Logic Using the Virtual Surround Back modeSBch Standard Type of source AutoPro Logic Neo6 Using the genre synchronizing functionMode DTS-HD Master Audio/DTS-HD DTS-EXPRESS encoded stereoSaving station presets Using the tunerUsing the tuner Chapter Listening to the radioListening to station presets Using the tunerNaming station presets AbcdefghijklmnopqrstuvwxyzMaking receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Select the setting you want to adjustSystem Setup menu McaccIf necessary, confirm the speaker configuration OSD.1 Surround back speaker setting Manual Mcacc setupFine Channel Level Adjust the level of the left channelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceAdjust the parameters for the Standing Wave Control Acoustic Calibration EQ AdjustSelect ‘Standing Wave’ from the Manual Mcacc setup menu Select ‘EQ Adjust’ from the Manual Mcacc setup menuSelect the channels you want and adjust to your liking How to use Acoustic Calibration EQ ProfessionalHow to interpret the graphical output Acoustic Calibration EQ ProfessionalUsing Acoustic Calibration EQ Professional Select ‘EQ Professional’, then press EnterSelect an option and press Enter Select ‘Data Management’ from the System Setup menu Data ManagementRenaming Mcacc presets Checking Mcacc preset dataCopying Mcacc preset data Clearing Mcacc presetsSelect ‘Manual SP Setup’, then press Enter System Setup menu Manual speaker setupSpeaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuAdjust the level of each channel using / Select a setup optionConfirm your selected setup option Channel LevelSpeaker Distance CurveOther connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterOther connections Switching the iPod controls2Press iPod Ctrl to switch the iPod controls.3 Basic playback controlsSwitch on the receiver and your TV Other connections Connecting a USB deviceConnecting your USB device to the receiver Basic playback controlsUsing XM Radio Connecting your XM Radio receiverCompressed audio compatibility Using the XM Menu Saving channel presetsUsing XM HD Surround Listening to XM RadioUsing Sirius Radio Connecting your SiriusConnect TunerListening to Sirius Radio Sirius Menu provides additional Sirius Radio features.2 Connecting the multichannel analog inputsUsing the Sirius Menu Press / to select the channel preset you wantAre for the Speaker B setting only.2 Speaker B setupSwitching the speaker system Selecting the multichannel analog inputsBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below Making MULTI-ZONE connections Other connections Connecting additional amplifiersMULTI-ZONE listening LargeSurround Back System MULTI-ZONE setup Zone Using the MULTI-ZONE controlsBasic MULTI-ZONE setup Zone MULTI-ZONE listening optionsUse the Master Volume dial to adjust the volume Connecting an IR receiverMULTI-ZONE remote controls Press ControlVideo ANT MPX Signal SEL Hdmi Control Setting the Hdmi optionsSetting the Hdmi Control mode Hdmi Control ChapterHdmi Control Synchronized amp modeBefore using synchronization About Hdmi ControlInput Setup menu Other SettingsOther Settings Chapter SetupInput function default and possible settings Other SettingsOther Setup menu Press Receiver on the remote control, then press SetupMulti Channel Input Setup Zone Audio SetupSelect ‘SR+ Setup’ from the Other Setup menu SR+ Setup for Pioneer flat panel TVsOSD Adjustment Select the ‘PDP Volume Control’ setting you wantSetting the Audio options Using other functionsUsing other functions Chapter Press Return to confirm and exit the menuUse / to select the setting you want to adjust Using other functionsSetting the Video options Press RECEIVER, then press Video ParameterPrepare the source you want to record Making an audio or a video recordingSelect the source you want to record Tune to the radio station, load the CD, video, DVD, etcChecking your system settings Using the sleep timerSwitching the speaker impedance Dimming the displayPress the front panel Auto SURR/STREAM Direct button Resetting the systemDefault system settings Press Sound Retriever to confirmPreset code list Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemControlling the rest of your system Controls for TVsControls for other components Decide which component you want to use the remote sensor  & EnterHDD Additional information TroubleshootingPower Additional information ChapterSymptomRemedy Additional informationOther audio problems Settings VideoSignal SEL button Professional Calibration EQ graphical outputDisplay Remote control USB interfaceReceiver to a component or TV with the DeepColor feature Or other setting for your componentOther setting for your component Hdcp Error showsImportant information regarding the Hdmi connection Configuration aConfiguration B XM radio messagesSymptom Cause Action Sirius radio messagesAdditional information Surround sound formats DolbyDTS Neo6 Windows Media Audio 9 ProfessionalDTS Digital Surround DTS 96/24About XM Radio XM Ready Legal Additional information About XMAbout Neural THX Surround XM Ready SubscriptionStereo 2 channel signal formats SBch Processing Input signal format Standard Auto SurroundON/AUTO PRO Logic Pro Logic ll MoviePro Logic ll Music Pro Logic ll Game Pro Logic ll Movie Pro Logic ll Music Pro Logic ll GameMultichannel signal formats PCM Direct Pure Direct Dolby Digital SurroundAdditional information Specifications Additional information Cleaning the unit To establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Europe NV Pioneer Electronics USA INCPioneer Electronics of CANADA, INC Pioneer Electronics DE Mexico S.A. DE C.V
Top Page Image Contents