Blue Microphones 200 manual Care instructions, Tech specs

directly against the source. For a more natural sound, simply pull the source back from the microphone 2-4 inches. For more tips on microphones and recording, be sure to visit www.bluemic.com.

care instructions

The en•CORE 200’s metal plated finishes will provide years of service and good looks if properly cared for. To clean your en•CORE 200, simply wipe down with a damp cloth. Use of harsh cleaners or abrasives may cause damage to your en•CORE’s surface finish.

The en•CORE 200 was designed for the rigors of daily use, and will stand up to demanding live performance or recording environments. We know performances can get pretty intense out there, but try to avoid excessive physical abuse or moisture exposure to the microphone — failure to do so could impact sound quality or reliability of your en•CORE microphone.

tech specs

Transducer Dynamic Moving Coil

Polar Pattern Cardioid

Frequency Response 50Hz — 16kHz

Maximum SPL 147 dB SPL

Output Impedance 25 ohms

Sensitivity 2.25 mV/Pa

Dimensions—Length 185mm/7.3in

Dimensions—Diameter 28mm(50mm Max)/1.10in (1.97in max)

4 Weight 0.88 lbs/0.4 kG