Alpine CDE-9873 owner manual 27-EN

Page 28

Antenna Receptacle

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio interface output of a cellular phone which provides ground shorting when a call is received.

Illumination Lead (Orange)

This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of this unit to dim whenever the vehicle’s lights are turned on.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

Power Supply Connector

Right Front (+) Speaker Output Lead (Gray) Right Front (–) Speaker Output Lead (Gray/Black) Right Rear (–) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (–) Speaker Output Lead (Green/Black) Left Front (–) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White)

Fuse Holder (10A)

Front Output RCA Connectors

RED is right and WHITE is left.

Rear/Subwoofer* Output RCA Connectors

RED is right and WHITE is left.

*When Subwoofer is set to OFF: Output is from Rear speakers.

When Subwoofer is set to ON: Output is from Subwoofer.

RCA Extension Cable (sold separately)

iPod Direct Connector

Control iPod signals.

Connect this to an iPod by using the FULL SPEEDTM Connection Cable (KCE-422i) (sold separately).

FULL SPEEDTM Connection Cable (KCE-422i) (sold separately)

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

27-EN

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CDE-9873 Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Turning Power On and Off Adjusting VolumeGetting Started Initial System Start-UpLowering Volume Quickly Setting TimeRadio Listening to RadioPresetting Stations Manually Presetting Stations AutomaticallyTuning to Preset Stations PlaybackRepeat Play X. Random PlaySearching from CD Text About MP3/WMA/AAC Quick Search10-EN Terminology 11-ENSetting the Bass Control Sound SettingLeft and Right/Fader Between Front Rear/Defeat Setting the Treble Control Adjusting the High Pass FilterSetting the Treble Center Frequency Setting the Treble LevelOther Functions Displaying the TextDisplaying Time 14-ENVisual Customizing Sound Customizing15-EN External Device 16-ENSearching for a desired Song IPod Optional17-EN Direct Search Function 18-ENRandom Play Shuffle M.I.X 19-ENInformation Case of DifficultyBasic RadioIndication for iPod Mode AudioIPod Indication for CD PlayerSpecifications 22-ENInstallation and Connections 23-ENInstallation 24-EN25-EN Install the detachable front panel RemovalPull the unit out, keeping it unlocked as you do so Connections 26-EN27-EN Page Page Limited Warranty This Warranty does not cover the following
Related manuals
Manual 88 pages 1.61 Kb

CDE-9873 specifications

The Alpine CDE-9873 is a premium in-car audio system designed for automotive enthusiasts seeking superior sound quality and advanced connectivity options. Known for its sleek design and user-friendly interface, the CDE-9873 seamlessly integrates high-performance audio technologies with modern conveniences.

One of the standout features of the CDE-9873 is its digital media playback capability. Supporting a variety of formats, including MP3, AAC, WMA, and WAV, users can enjoy their favorite tracks without compromising on sound quality. Additionally, the unit comes equipped with a 24-bit D/A converter that ensures precise audio reproduction, delivering crystal-clear sound across all frequencies.

Connectivity is a key focus of the CDE-9873. The device includes USB and AUX inputs, allowing users to connect their smartphones and other portable devices with ease. With built-in Bluetooth technology, the unit enables hands-free calling and wireless audio streaming, creating a safer driving experience while keeping you connected to your favorite music and calls.

The power output of the CDE-9873 is impressive, featuring a robust 18 watts RMS per channel, which allows for rich sound even at higher volume levels. This power can be further enhanced by the unit’s preamp outputs, giving users the flexibility to connect external amplifiers for a more powerful audio experience.

Another distinctive feature of the Alpine CDE-9873 is its customizable sound settings. The unit offers a 9-band graphic equalizer that allows users to fine-tune their sound preferences, while a built-in sound processor enhances audio clarity and balance. The Bass Engine technology further enriches low-frequency performance, making it an excellent choice for bass lovers.

The design of the CDE-9873 is both aesthetic and functional. With a vibrant display that is easy to read in various lighting conditions, user navigation is intuitive and simple. The controls are strategically placed for convenience, ensuring that drivers can operate the system without distraction.

In summary, the Alpine CDE-9873 combines cutting-edge audio technology with user-friendly features, making it an excellent choice for anyone looking to enhance their in-car audio experience. With its impressive sound quality, extensive connectivity options, and customizable settings, the CDE-9873 stands out in the crowded market of car audio systems, promising to elevate your driving experience to a new level.
Top Page Image Contents