3 Interfacing
3.1 General
Section 3 applies to both the PERCEPTION 120 and the PERCEPTION 220.
The microphone uses a condenser transducer de- signed for
IEC
3.2 Pinout
The microphone provides a balanced output on a 3- pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: cold
3.3 Connecting the Microphone
Refer to fig. 2.
1.Use an XLR cable to connect the microphone to a balanced XLR input with phantom power.
2.Switch the phantom power on. (Refer to the user manual of the unit to which you connected your microphone.)
Fig. 2: Connecting to a balanced input with phantom power.
AKG PERCEPTION 120/220 | 5 |